ProMediaGear TR424L Pro-Stix Carbon-Fiber Tripod with Top Plate (Red, 77')

This TR424L Pro-Stix Carbon-Fiber Tripod from ProMediaGear supports up to 125 lb, measures 26.3" when folded, and includes a tripod top plate with a 3/8" -16 mount. Each of its four-section legs has a maximum diameter of 42mm. They also feature an independent spread, a three-position angle lock, quarter-turn twist locks for rapid deployment, and rubber feet to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 6.7" to a maximum height of 77" . For use on soft and uneven soil, each of the rubber feet can be unscrewed to access a stow-away metal spike which can be fastened to the bottom of its corresponding foot.

Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8" -16 mount can be connected to the tripod s top plate, which is designed to be clamped onto the tripod s aluminum-alloy head. The red head features a durable truss design that minimizes weight along with the carbon-fiber construction of the legs. To further secure the top plate while in use and prevent it from accidentally sliding off when the tripod head s clamp is opened, the head also includes a cam lock with a push-button release.

Alternatively, a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with a separately-available TRB75 75mm Tripod Bowl Insert can be installed within the aluminum-alloy head. A video tripod head that is directly compatible with the TRB75 tripod bowl insert or the TRBU75 tripod leveling base s 3/8" -16 mount can be used with this tripod and oriented without adjusting the tripod s legs.

For direct attachment of accessories that feature 1/4" -20 mounts, the underside of the top plate is tapped with one 1/4" -20 female accessory thread. Four additional 1/4" -20 female accessory threads are distributed along the sides of the head, and two 1/4" -20 female accessory threads are positioned toward the top of each leg, one along each side of its connecting hinge. ProMediaGear accessories that incorporate a 1/4" -20 mount in between two anti-twist pins can be attached to either of the 1/4" -20 female accessory threads on each of the tripod legs, or to two of the 1/4" -20 accessory threads along the head. Alongside each of those eight 1/4" -20 accessory threads are pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4" -20 mount.

Use and Handling

• Supports up to 125 lb
• Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8" -16 mount can be connected to the included tripod top plate, which is intended to be clamped onto the tripod s head
• Clamping head also includes a cam lock with a push-button release to further secure the top plate while in use and prevent it from accidentally sliding off when the tripod head s clamp is opened
• Alternatively, tripod accepts a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with separately-available TRB75 75mm Tripod Bowl Insert
• A video tripod head that is directly compatible with a separately-available ProMediaGear TRB75 75mm Tripod Bowl Insert or the 3/8" -16 mount of the separately-available TRBU75 75mm Tripod Leveling Base can be used with the tripod and oriented without adjusting the tripod s legs
• Can be set for a minimum height of 6.7" to a maximum height of 77"
• Legs each feature 4 sections, quarter-turn twist locks for rapid deployment, and can be independently spread
• Legs can be locked at 22.5° , 55° , or 89° angles
• Rubber feet with stow-away, metal spikes to further enhance stability on a wide variety of surfaces, including soft and uneven soil
• Built-in tripod bubble level
• For direct attachment of accessories that feature 1/4" -20 mounts, the underside of the top plate is tapped with one 1/4" -20 female accessory thread, four 1/4" -20 female accessory threads distributed along the sides of the head, and two 1/4" -20 female accessory threads positioned toward the top of each leg, one along each side of its connecting hinge
• Either of the 1/4" -20 female accessory threads on each of the tripod legs, or two of the 1/4" -20 accessory threads along the head have adjacent pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4" -20 mount
• Weighs 6.4 lb, measures 26.3" when folded
• Hex key to adjust tension on leg hinges

Construction Details

• Carbon-fiber legs with a maximum diameter of 42mm
• Red aluminum-alloy tripod head features a durable truss design that minimizes weight

EAN: 609456717175