Robus RC-5558-3 Vantage Series 3 Carbon Fiber Tripod

When your career depends on that next shot, you need a tripod that s much more than just three legs to stand on. Meeting and succeeding that need, we have the RC-5558-3 Vantage Series 3 Carbon Fiber Tripod, one of a series of tripods from Robus that delivers performance to satiate the most demanding image-makers, regardless of the conditions or terrain in the field. The 10x carbon fiber legs feature wide, stable leg tube diameters. Even at maximum extension of 58.5" , these substantial cylinders combine with the tripod s anodized CNC-machined spider to support video or still camera rigs weighing up to 55 lb.

Shooting outdoors can definitely be a challenge, especially when doing macro or close up photography on the ground. But with three variable leg angles of 25, 55, and 85° , plus independent leg spread, the tripod can be splayed out to a minimum height of just 4.1" . The tripod s central spider features a lock to loosen the yoke and a safety pull latch that releases the finely machined top plate. This permits interchangeability with the included 75mm video bowl. There s also an optional center column available that extends the RC-5558-3 s maximum height of 73.25" .

A quarter turn of the tripod s twist-locks retracts the 3-section legs to a reasonable folded length of 26.9" . Two of the legs have tactile rubber grips that ensure a secure hold as you carry the support from one place to another. Additionally, a 3/8" -16 socket at the end of each leg allows you to swap out the standard feet for the included spikes or wide rubber feet to accommodate different terrains and surfaces.

With a possible 73" reach, a 55 lb weight capacity, and a folded length of less than 27" , the tripod s notable stability and performance-based features ensure its place as a favorite go-to-support solution for professionals and dedicated enthusiasts.

10x Carbon Fiber Legs

Provides stability and dampen vibrations, which would cause shake in the camera.

CNC-Machined Aluminum Spider

The CNC-machined spider features a lock to loosen the yoke and a safety pull latch that releases the top plate, which has a counterweight hook on the bottom. The anodized spider also features a strap mount and an integrated bubble level that ensures your horizons are always leveled.

Interchangeable Top Plates

A finely machined top plate features a smooth anodized finish, a chamfered leading edge for ease of installation, and a 3/8" -16 threaded head mount. The 75mm bowl is interchangeable with the top plate and mounts into the spider in the same fashion. There s also an optional center column available that extends the RC-5558-3 s maximum height to 73.25" .

All Surface Capable

Accommodate different terrains and surfaces via the three different sets of feet. The standard rubber feet, wide rubber feet, and spikes are all interchangeable via the 3/8" -16 socket at the end of each leg.

Variable Leg Angles

Three variable leg angles of 25, 55, and 85° with independent leg spread accommodate uneven terrain, and allow you to shoot at a minimum height of 4.1" .

Twist Leg Locks

Twist Locks that open with a quarter turn to extend to a maximum height of 58.5" or collapse the 3-sections of the leg in a quick and timely manner.

Tactile and Comfortable Rubber Leg Grips

Heavyweight rubber sleeves on two legs provide a secure, comfortable, and balanced grip under any weather conditions.

EAN: 847628037724