Manfrotto MT190CXPRO4 Carbon Fiber Tripod with MHXPRO-3W 3-Way Pan/Tilt Head Kit

This Kit pairs the Manfrotto MT190CXPRO4 Carbon Fiber Tripod with a MHXPRO-3W 3-Way Pan/Tilt Head. Holding up to 15.4 lb of gear, and with a maximum height of 68.1" , the tripod features a Quick Power Lock System that allows you to completely extend the tripod legs with just one hand. Once set up you can use the MT190CXPRO4 s rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto s 90° column feature. Enlarged tabs on the individual leg angle selectors allow you to get down low for macro work with the column in horizontal mode. And once you re down there you can attach any of Manfrotto s flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod s spider.

The MHXPRO-3W is a compact 3-way pan/tilt head with retractable handles that can be extended as needed. Two knobs control the friction for the front-to-back and side-to-side tilt, allowing you to fine tune the movements based on the weight of your gear. A 200PL quick-release plate is included with the head.

Manfrotto MT190CXPRO4 Carbon Fiber Tripod

The black, redesigned MT190CXPRO4 Carbon Fiber Tripod from Manfrotto builds on the success and popularity of the previous 190 series with professional hardware and convenience features that make it even easier to use than its predecessor. When the three leg sections and center column are fully extended, the tripod reaches a maximum height of 63" , and its load capacity of 33 lb makes it a good choice for larger cameras. The tripod weighs 3.6 lb, and folds down to 20.6" for transport.

Set up is faster than ever with Manfrotto s Quick Power Lock System that allows you to completely extend the tripod legs with just one hand. Once set up you can use the MT190CXPRO4 s rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto s 90° Column feature. Enlarged tabs on the individual leg angle selectors allow you to get down to only 3.2" for macro work with the column in horizontal mode. And once you re down there you can attach any of Manfrotto s flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod s spider.

Convenience features include a bubble level that rotates so that you can see it easily regardless of the tripod s position. Finally, Manfrotto s insistence on form following function has yielded a tripod that you ll not only be happy to use but you ll be happy to be seen with, too.

Fast Setup with QPL

The Quick Power Lock (QPL) system is one of the most eye-catching and unique features of the redesigned 190. It is a strong, ultra fast, ergonomic locking system that allows for complete extension of the legs with one hand.

90° Column

One of the most innovative aspects of the 190 series is its compactness, which allows for easier portability. The redesigned patented 90° Column is accessible whenever you need it with simple one finger operation.

Easy Link Plug

The plug allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets.

Rotating Leveling Bubble

The bubble is easy to read, whatever the shape of the head or however the tripod is positioned. Just rotate it towards you for easy viewing.

Leg Angle Selectors

Each leg has user selection of four angles to accommodate uneven ground or rough terrain. The selectors are manufactured according to most innovative ergonomic standards to prevent fingers and nails being trapped in the upper casting.

EAN: 719821364627

Manfrotto XPRO 3-Way, Pan-and-Tilt Head with 200PL-14 Quick Release Plate

This XPRO 3-Way, Pan-and-Tilt Head from Manfrotto has a load capacity of 26.5 lb and can be attached to tripods or other support systems that feature a 3/8" -16 mount. It includes an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. RC2 compatible quick release plates such as the 200PL-14 can be removed from the head by pulling the cam lock s spring-loaded lever, which also allows the plate to be quickly reattached. The cam lock also features a safety catch to prevent the 200PL-14, or another compatible quick release plate from accidentally disconnecting.

Cameras, sport optics, or camcorders that are compatible with a 1/4" -20 mount can be connected to the quick release plate before securing it to the pan-and-tilt head. The head can be rotated 360° , tilted 90° forwards or 30° backwards, as well as 90° sideways for portrait orientation. Each of these three movements function independently of each other, have dedicated control handles, and can be locked into place. In addition to integrating the ability to individually lock the movements by twisting each corresponding handle s rubberized grip, the telescoping control handles for both tilt functions can also be retracted while the head is not in use for more convenient storage or transport.

To promote fast and repeatable device positioning, this XPRO 3-Way, Pan-and-Tilt Head also includes a dedicated angle scale for rotational movements that is designed for easy visibility, as well as dedicated control knobs set under the telescoping control handles that can each be rotated to apply tension control to either the backwards and forwards, or sideways tilt movements at any time.

XPRO 3-Way, Pan-and-Tilt Head

• 26.5 lb load capacity
• Compatible with tripods or support systems that feature a 3/8" -16 mount
• Can be rotated 360° , tilted 90° forwards or 30° backwards, as well as 90° sideways for portrait orientation
• Rotation, backwards and forwards tilt, as well as portrait orientation tilt each function independently of each other, have dedicated control handles, and can be locked into place
• Telescoping control handles for both tilt functions can be retracted for more convenient storage or transport
• Dedicated angle scale for rotational movements that is designed for easy visibility helps promote fast and repeatable device positioning
• Integrated, RC2 quick release cam lock
• Two bubble levels for landscape orientations and one bubble level for portrait orientations
• Durable, aluminum-alloy construction

200PL-14 Quick Release Plate

• Compatible with Manfrotto RC2 quick release cam lock
• Measures 1.7 x 2.1 x 0.4" and has a rubberized, non-slip surface
• 1/4" -20 mount
• Durable, aluminum-alloy construction

EAN: 719821364733