Slik Pro 700 BHX Tripod with SBH-808DQ Ball Head

Slik Pro 700 BHX Tripod with SBH-808DQ Ball Head

EAN: 049368705059

The SLIK Pro 700 BHX Tripod with SBH-808DQ Ball Head supports up to 11.0 lb, measures 29.9 when folded, and includes a quick release plate. Each of its 3-section legs features an independent spread, a 3-position angle lock, and flip locks for fast deployment. The included push-and-pull, rapid center column is multi-sectional, which allows it to be converted to a shortened center column. This feature permits a minimum height of 25.4 or 16.1 when the center column is shortened. The SLIK Pro 700 BHX Tripod provides a maximum height of 60.0 , 65.8 with its center column shortened as well as fully raised, and 75.0 with the complete column fully raised.

Cameras, sport optics, or camcorders that are compatible with a 1/4 -20 mount can be connected to the quick release plate, which is secured to the tripod s ball head using a quick release cam lock. By loosening the ball head s primary locking knob, the head s ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable pressure can be applied to the ball-and-socket joint s movements by rotating the tension knob located opposite the primary locking knob. Toward the base of the ball head is a secondary locking knob, which controls the ability to rotate the head 360° .

For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod s legs instead of above them. Foam covers on each of the legs provide a secure and comfortable grip while moving the tripod, and rubber feet help to enhance stability on a wide variety of surfaces.

Use and Handling

• Supports up to 11.0 lb
• Push-and-pull center column for rapid camera, lens, or sport optic positioning
• Center column is multi-sectional, allowing it to be converted to a shortened center column that allows the tripod to be set at a minimum height of 25.4 , or 16.1 when the column is shortened
• Tripod can be set to a maximum height of 60.0 , 65.8 when the column is shortened as well as fully raised, and 75.0 with the complete column fully raised
• Column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod s legs instead of above them
• Legs each feature three sections, an independent spread, a 3-position angle lock, and a flip lock for rapid deployment
• Legs can be locked at 16° , 40° , or 65° angles
• Foam covers on each of the legs provide a secure and comfortable grip
• Rubber feet for stability
• Weighs 8.1 lb, measures 29.9 when folded
• Ball head provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Tension knob located opposite the primary locking knob applies variable pressure on the ball-and-socket joint s movements
• Secondary locking knob allows head to rotate 360°

Construction Details

• Aluminum, magnesium, and titanium-alloy legs
• Cast-aluminum ball head with quick release cam lock
• Quick release plate with 1/4 -20 mount with anti-slip, cork surface
• Center column platform for ball head with reversible 1/4 -20 and 3/8 -16 mount
• Included carry bag features a zippered closure and handle for storage and transport of the tripod with ball head