Sunwayfoto T2840CK Knight Series Carbon Fiber Tripod with EB-44 Ball Head

The T2840CK Knight Series Carbon Fiber Tripod with EB-44 Ball Head set from Sunwayfoto combines the robust and versatile T2840CK carbon fiber tripod leg set with the EB-44 ball head to create a feature-laden tripod set ideal for both studio and location shooting.

Sunwayfoto T2840CK Knight Series Carbon Fiber Tripod (51.2" )

The robust T2840CK Knight Series Carbon Fiber Tripod from Sunwayfoto is a versatile, feature-rich carbon fiber tripod with a load capacity of 39.7 lb and a maximum height of 51.2" . It folds to a compact 19" for storage or travel and weighs only 3.42 lb.

The carbon fiber legs have water-, dust-, and sand-resistant sealed twist-lock joints for reliable use in harsh environments with minimum maintenance. The legs have independent spread and open to three locking angles, making it possible to level the leg set on uneven terrain and achieve a minimum height of 2.8" for low-perspective angles and macro imaging. The tripod head platform has a ballast hook with adjustable strap and a reversible 3/8" -16 to 1/4" -20 threaded mounting stud. Multiple 1/4" -20 sockets allow accessories like compact LED lights, microphones, and more to be directly attached.

• Independent leg spread
• Leg angles: 23, 55, 85°
• Weatherproof, ergonomic twist-lock joints
• Integrated head platform with ballast hook with adjustable strap
• Reversible 3/8" -16 to 1/4" -20 head mounting stud
• 1/4" -20 accessory mount sockets
• Interchangeable spiked feet

Sunwayfoto EB-44 EPIC Series Traveler Ball Head

All the components of the Sunwayfoto EB-44 EPIC Series Traveler Ball Head feature a minimalist design, with any unnecessary sections cut out and hollowed out in all the right places, resulting in a significantly lighter-weight and more compact setup.

The EB-44 has an Arca-type clamp with a quick release plate and supports up to 44 lb loads. It has independent pan adjustment with a pan lock knob, and the 360° ball rotation is locked by another knob. Both knobs are large for easier use. The mounting thread on the bottom is a 3/8" -16 female, and a 1/4" -20 reducer is included, allowing you to mount the head on sliders, monopods, and most other camera supports. A notch on the side of the head lets you tilt the camera 90° into portrait mode.