Sunwayfoto T4040CM Master Series Carbon Fiber Tripod with EB-52 Ball Head

Sunwayfoto T4040CM Master with EB-52 Ball Hea... Overview

The T4040CM Master Series Carbon Fiber Tripod with EB-52 Ball Head from Sunwayfoto combines the robust and versatile T4040CM Master Series Carbon Fiber Tripod with the EB-52 Epic Series Traveler Ball Head to create a feature-laden tripod and head set ideal for almost any application. This leg and head set is well-suited to working with large telephoto lenses.

Sunwayfoto T4040CM Master Series Carbon Fiber Tripod (63.4" )

The robust T4040CM Master Series Carbon Fiber Tripod from Sunwayfoto is a versatile, feature-rich carbon fiber tripod with a load capacity of 88.2 lb and a maximum height of 63.4" . It folds to a compact 23.2" for storage or travel, and weighs only 5.1 lb.

The carbon fiber legs have water-, dust-, and sand-resistant sealed twist-lock joints for reliable use in harsh environments with a minimum of maintenance. The legs have independent spread and open to three locking angles, making it possible to level the leg set on uneven terrain. They achieve a minimum height of 3" for low-perspective angles and macro imaging. The tripod head platform has a ballast hook, and the included interchangeable 75mm bowl can be changed out within seconds without the need for any tools.

• Independent leg spread
• Leg angles: 23, 55, 85°
• Interchangeable 75mm bowl
• Head platform with ballast hook
• 1/4" -20 accessory mount sockets
• Interchangeable spiked feet

Sunwayfoto EB-52 EPIC Series Traveler Ball Head

All the components of the Sunwayfoto EB-52 EPIC Series Traveler Ball Head feature a minimalist design, with any unnecessary sections cut out and hollowed out in all the right places, resulting in a significantly lighter-weight and more compact setup.

The EB-52 has an Arca-type clamp with a quick release plate and supports up to 66 lb loads. It has independent pan adjustment with a pan lock knob, and the 360° ball rotation is locked by another knob. Both knobs are large for easier use. The mounting thread on the bottom is a 3/8" -16 female, and a 1/4" -20 reducer is included, allowing you to mount the head on sliders, monopods, and most other camera supports. A notch on the side of the head lets you tilt the camera 90° into portrait mode.