Vanguard Alta Pro 263ABT 100 Aluminum Alloy Tripod with SBH-100 Ball Head

This Alta Pro 263ABT 100 Aluminum Alloy Tripod from Vanguard supports up to 15.4 lb, measures 28.1" when folded, and includes an SBH-100 ball head with QS-39 quick release plate. Each of its three-section legs features an independent spread as well as twist-lock joints for fast deployment. Together, the three legs can be positioned for a minimum height of 56" to a maximum height of 68.1" with the center column fully raised. Foam covers on each of the legs provide a secure, comfortable grip while moving the tripod, and rubber feet each with a twist-out, metal spike further enhance stability on a wide variety of surfaces, including soft and uneven soil.

For situations where even a compact tripod may be too bulky for use, one leg detaches to become a sturdy monopod. Just attach the ball head for lightweight, run-and-gun support when shooting wildlife, sports, and other fast-moving action.

Cameras or accessories that are compatible with a 1/4" -20 mount can be connected to the QS-39 quick release plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head s ball-and-socket joint by tightening or loosening the clamp s knurled, locking knob. The quick release plate features a rubberized, non-slip platform while two built-in bubble levels are located along the edges of the clamp.

By loosening the ball head s primary locking knob, the head s ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Toward the side of the ball head opposite the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360° .

For added versatility, the center column is connected to the tripod by a fulcrum which enables 90° of upwards or downwards tilt that can be locked into place. Additionally, the center column assembly permits 360° of independent rotation. With the ability to push and pull the center column, those tilt and swivel movements allow the center column to be used as an extendable cross arm or a miniature camera boom. This allows an attached camera to be easily raised toward an elevated subject or over a scene. A camera that is placed toward the end of center column can be positioned perpendicular to the tripod, and extended past the tripod s legs, which is particularly useful for copy stand or macro photography. For subjects along the ground, the center column can also be used to obtain low angles while the tripod s user is positioned comfortably behind the camera.

Additionally, a carry bag is included for storage or transport.

General Use and Handling

• Supports up to 15.4 lb
• Push-and-pull rapid center column for rapid positioning
• Can be set to a minimum height of 56" to a maximum height of 68.1" with the center column fully raised
• For added versatility, the center column is connected to the tripod by a fulcrum that enables up to 90° of upwards or downwards tilt
• Center column assembly permits 360° of independent rotation
• Tilt, swivel, as well as push-and-pull movements allow the center column to be used as an extendable cross arm or a miniature camera boom
• Hexagonal shaft design provides center column with increased torsional rigidity
• A removable leg converts into a convenient monopod
• Aluminum alloy legs each feature three sections with twist-lock joints for fast deployment, and can be independently spread
• Legs can be locked at 25, 50, or 80° angles
• Foam covers on each of the legs provide a secure and comfortable grip
• Rubber feet with twist-out, metal spikes further enhance stability on a wide variety of surfaces, including soft and uneven soil
• Built-in tripod bubble level, ballast hook, and 1/4" -20 mount for direct attachment of accessories that feature 1/4" -20 female accessory threads
• 1/4" -20 to 3/8" -16 mount adapter for attachment of accessories that feature 3/8" -16 female accessory threads
• Weighs 5.4 lb, measures 28.1" when folded

Ball Head

• Magnesium alloy ball head with quick release clamp
• Compatible with tripods or support systems that feature a 1/4" -20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Secondary locking knob with knurled surface allows head to rotate 360°
• Integrated clamp on top of on the ball-and-socket joint is compatible with included QS-39 Quick Release Plate
• Two built-in bubble levels along the edges of the clamp

EAN: 026196354826