Ruggard Thunderhead 35 DSLR/Laptop Backpack and Tripod Kit

Photographers who enjoy outdoor adventure and shooting at all times of the day and night will appreciate the Thunderhead 35 DSLR/Laptop Backpack and Tripod Kit from Ruggard and Oben. The Ruggard Thunderhead 35 pack holds a DSLR, 70-200mm zoom lens, up to three additional lenses, a flash, and related accessories. It also has a dedicated compartment for your 13" laptop and a side tripod attachment. Front access to the main compartment, three zippered pockets, and padded, interior, touch-fastening dividers make gear management fast and easy. For weather protection, the pack features a water-repellent exterior and a removable rain cover. There s even a security whistle.

Paired with the pack is an Oben tripod with a removable BA-111 Ball Head. At only 3.3 lb, this tripod boasts a load capacity of 11 lb and an impressive height range of 8.3 to 61.6" . To save space and make for easier carrying, the tripod has four leg sections and a folded length of 21.3" . Included with the tripod is a padded carry bag and two Allen keys. Angled leg locks, leg cushions, a grooved center column, spring-loaded counterweight hook, two-piece column, and angled rubber feet help provide enhanced versatility. Keeping your camera level is simple with the five built-in levels. Whether shooting the stars above or the valleys below, this Kit should serve you well, wherever you may go.

Ruggard Thunderhead 35 DSLR & Laptop Backpack (Black)

Ideal for traveling and hiking, this black, water-repellent Thunderhead 35 DSLR & Laptop Backpack from Ruggard holds a DSLR with an attached zoom lens such as a 70-200mm, 3 additional lenses, and a flash between padded touch-fastened dividers inside a spacious main compartment. This bag is packed with pockets of all sizes, and one of them is a dedicated compartment which will hold most 13" laptops. Additionally, there is a side attachment for securely storing your tripod.

The front of the backpack features small, medium, and large pockets and the main zippered compartment, which unzips all the way down providing full front access to your gear. Each side of the backpack provides a mesh slip pocket with a drawstring closure and the base has a zippered pocket, which stores a removable rain cover.

At the back behind the laptop compartment, there is a contoured breathable mesh padded panel and shoulder harness. The harness features sternum and padded hide-away waist straps for additional support as well as a trolley sleeve for attaching the backpack to your luggage. For quickly grabbing the backpack, the top features a sturdy and comfortably padded grip handle.

Construction

600D Oxford nylon exterior with water-repellent coating and 1680D ballistic nylon front

150D polyester interior

Exterior YKK zippers with zipper pull tabs to assist in opening

Quick-release strap on each side secures the main compartment

Two D-rings at the front of each shoulder strap for attaching accessories

Exterior attachment loops for securing optional accessories

Dual compression straps on top of shoulder straps

Dual protective hard rubber feet at base

Small Zippered Pocket

Two interior mesh slip pockets on flap

Two interior fabric slip pockets at the back

Two pen slots

Key leash

Large Zippered Pocket

Large mesh slip pocket with snap-button closure on flap

Clear business card sleeve

One small zip pocket

Two laminated mesh slip pockets

Two fabric slip pockets

Large and small slip pockets

Main Gear Compartment

Three interior laminated mesh zip pockets on flap

Three memory card pockets with touch-fastened tabs on flap

Two elastic touch-fastened security straps protect camera gear

Nine small and two large padded touch-fastened dividers

Exterior Pockets

Rear padded zip side-entry compartment holds most 13" laptops

Front vertical zip pocket holds smartphone or passport

Mesh slip pocket with drawstring closure on each exterior side of backpack

Zippered base pocket stores removable rain cover

Side Tripod Attachment

Side mesh pocket functions as tripod cup

Two quick-release belts help secure top of tripod

Carrying Comforts

Breathable mesh padded shoulder straps and back panel

Padded waist belts with accessory attachment loops tuck away into back panel

Rear trolley strap for attaching to luggage

Sternum straps with attached security whistle

EAN: 847628564718

Oben AC-1441 4-Section Aluminum Tripod with BA-111 Ball Head

The Oben AC-1441 4-Section Aluminum Tripod with BA-111 Ball Head provides reliable support for DSLRs, point-and-shoot cameras or video cameras up to 11 lb.

The tripod s three-section legs are fabricated from high tensile strength aluminum. It rises to a maximum height of 61.6" with the center column fully extended and folds down to a compact 21.3" for transport. Flip locks on the legs facilitate rapid setup and break down. Three leg angles: normal (80° ), low (55° ) and extra low (24° ) are available via angle adjustment tabs at the joint of each leg. You can reverse the column with a twist of the butterfly knob or split it in two and use the short column for macro and low angle shooting as low as 8.3" from the ground. Any combination of leg angles can be combined to accommodate uneven terrain, stairs or obstructions. A built-in bubble level helps you square up your compositions. For extra stability, the center column employs a spring-loaded counterbalance hook.

The included BA-111 ball head features a single-action knob that controls its rotation and 360 degree panning while a robust ball-locking mechanism secures it solidly. The head s four bubble levels ensure accurate panoramas. The BA-111 s built-in quick release comes with a camera plate that features a standard 1/4" -20 screw and a retractable, removable video pin to provide additional stability for camcorders. Since the head is removable, locking screws underneath the collar thwart torsion when re-attaching. The tripod comes with a carry case and shoulder strap for storage and transport.

A spring-loaded counterweight hook is located at the bottom of the center column. The column can be separated into two parts to give you a short column for low angle and macro work

Leg cushions on two legs provide a firm grip in cold or wet weather

Two included hex keys attach to a tripod leg, so you re always ready to tighten components

Padded carry bag provides a snug fit for the tripod/head combination and features two heavy-duty zippers, an interior pocket with a zipper, and a shoulder strap

Angle adjustment locks keep legs at the chosen angles

Center column is grooved to prevent rotation

Angled rubber feet for maximum contact with the ground

Tripod features reversible 1/4" -20 and 3/8" -16 screw to fit almost any head

EAN: 847628556317