The large MoneyMaker 3-Camera Harness from HoldFast Gear is made from U.S. native steer hides, with anchored stainless steel D-rings, rust-resistant hardware, and safety straps for ultimate security. These features plus its versatile design make it an essential tool for the modern photographer.
The bottom side has a suede-like feel and will shed a little at first use. This stops very quickly, and you can run your hand along the length of the strap to remove any loose shavings. The bottom side is also colorless so it won t bleed onto your clothing.
HoldFast Gear uses real full grain leathers. As such, each hide will display the unique life that the animal lived and your harness straps may exhibit scars from brands, barbed-wire cuts, stretch marks, insect bites, marks from birthing, and natural creases.
Size/Fit Guide
Fit is based on height and broadness. The ideal carrying position of the MoneyMaker is for the strap to fall about 4-5" below the armpit so the cameras stay high on your body.
Small: Height of 5 7" and below if you are broad/built, size up
Medium: Height between 5 8" -6 2" if you are slender, size down, broad or built, size up
Large: Height of 6 3" and above OR wear extra-large clothing if you are slender, size down
Optimum fit will ensure the most comfort long term. If the MoneyMaker is worn too loose it causes the cameras to swing and sway too much, which puts pressure on your lower back and the straps tend to move and slip more. When worn properly, the MoneyMaker will be anchored to the body and actually help correct poor shooting posture by pulling your shoulders upright and back, keeping you and your cameras in line. So when the main straps are around 4" below the arm pit area, this will place the clip that attaches to the camera right around your waist line. There should be a good amount of arm bend when your hand is on the camera at resting position.
EAN: 850000973374
In the Box
- HoldFast Gear MoneyMaker 3-Camera Harness (Bridle Black, Large)
No posts found
