Pelican iM2100 Storm Case and Trekpak Divider Kit

pairs an empty Pelican iM2100 Storm Case with a Trekpak Divider Kit. The case does not come with foam.

Pelican iM2100 Storm Case without Foam (Black)

The Pelican iM2100 Storm Case without Foam (Black) is an injection-molded case made of HPX high performance resin, that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. There is a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and won t unscrew from the case. Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps that allow the addition of standard size padlocks. It has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It is carried by a double-layered, soft-grip, solid-core handle that provides strong, durable comfort.

This case has an empty interior.

Injection-molded case made of HPX high performance resin is virtually unbreakable, dent-resistant and shatter-resistant

Tough, rugged and lightweight

Airtight and watertight

On Board

Meets current FAA requirements for carry on bags, by fitting under seats and in overhead compartments

Note:

Requirements are subject to change always check with the carrier

Permanently attached Vortex valve automatically adjusts air pressure without letting in water, and won t unscrew from the case

Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress

Two unbreakable molded-in hasps allow the addition of standard size padlocks, offering another measure of security

Hinges with integrated feet hold fast under impact and create a flat surface for upright stability

Molded-in stacking ribs provide no-slip stability for multiple case-stacking during storage or transport

Double-layered, soft-grip, solid-core carrying handle provides strong, durable comfort

Tests

• Meets ATA 300 category 1 standards for transit cases
• Meets FED-STD-101C requirements for drops and vibration (loose cargo)
• Exceeds the specifications listed in MIL-STD-648C for vibration (sweep)
• Meets MIL-STD-810F for immersion and simulated rainfall

EAN: 825494000011

TrekPak Divider Kit for Pelican iM2100 Storm Case

This Divider Kit from TrekPak is designed for use within a Pelican iM2100 Storm Case. It can replace an existing divider system, or be used to create partitions within the case. This TrekPak divider kit uses thin rigid panels to maximize available carrying space, protect equipment and valuables for transport, and provide interior organization that can be easily rearranged and customized along with any changes to the contents of the Pelican case.

Included within this divider kit are two perimeter wall panels, three 12.25" divider sections, one 9" divider section, 20 pin and pull tabs, a double-sided cutting tool, one bottom foam unit, and one convoluted top foam unit.

To ensure that the dividers properly correspond to the case s internal height, the bottom foam unit must always be used when installing this divider kit. The perimeter wall panels can then be placed on top of the bottom foam unit so that together they conform to the interior sides of the Pelican case. Like the dividers, the perimeter insert sections are constructed so a partition can be connected to the perimeter insert sections by the divider locking pins.

Items within the Pelican case can then be arranged on top of the bottom foam unit and within the perimeter insert sections before they are segmented using the dividers. Multiple partitions can be quickly, easily, and precisely created by sliding the cutting tool through the dividers, which can then be arranged and rearranged according to whatever is placed within the case. Altogether this system provides 360° of protection while maximizing space for your gear.

• For use with the Pelican iM2100 Storm Case
• Replaces an existing divider system, or can be used to create partitions within a compatible and completely empty Pelican case
• Maximizes available carrying space, protects equipment and valuables for transport, and provides interior organization that can easily be rearranged or customized
• Divider kit provides two perimeter insert sections, two divider sections, 20 pins and pill tabs, one cutter tool, one bottom foam unit, and one convoluted top foam unit

EAN: 019428163112