FLM QLB-50 Universal Arca-Type Lever Clamp

I was worried about the size for the travel tripod FLM offers, as the twist knob on the original clamp would hit the legs or bubble level on the ballhead for certain cameras I use in the 90 degree recess.Not only did this clamp speed up my setup time for multiple camera setups, but it also has better clearance than the original clamp that came with the travel tripod. Only downsides I've found is there's no way to lock the position for travel (if you only use one plate, L-bracket, etc.). You'll have to clamp your gear and just double check with the knob you're fully locked in. If you have multiple plates and such, you'll have to do this anyway due to tiny differences in their machining. The other downside is the install. I've made a video for this, but the threaded stud has no flathead, allen, or any other head to assist in removal from the old clamp. There's a hole looking directly at the stud, so a machined, recessed torx/allen head would make this job easier. You can use a two nut method of removing the stud if it's stuck to the plate once separated from the ballhead.