Aquatica Bulkhead Connector for Using Remote Trigger with Housing
With this Bulkhead Connector added onto any of Aquatica s underwater camera housings, you can attach one of their remote triggers to your camera s remote cable socket. This setup allows you to trip the camera shutter from a distance, which is especially helpful when you re photographing shy or dangerous sea creatures and don t want to get too close.
The bulkhead has a very short internal cable terminating in a small connector that must be joined to an optional internal cord, such as the Aquatica #19310 10-pin cord for Nikon or #19311 3-pin cord for Canon. To attach the remote trigger to the bulkhead, you will need an optional, standard Ikelite-type sync cord.
With this Bulkhead Connector added onto any of Aquatica s underwater camera housings, you can attach one of their remote triggers to your camera s remote cable socket. This setup allows you to trip the camera shutter from a distance, which is especially helpful when you re photographing shy or dangerous sea creatures and don t want to get too close.
The bulkhead has a very short internal cable terminating in a small connector that must be joined to an optional internal cord, such as the Aquatica #19310 10-pin cord for Nikon or #19311 3-pin cord for Canon. To attach the remote trigger to the bulkhead, you will need an optional, standard Ikelite-type sync cord.
Aquatica 18739 Specs
Packaging Info
| Package Weight | 0.15 lb |
| Box Dimensions (LxWxH) | 6.3 x 1.5 x 1" |
In the Box
- Aquatica Bulkhead Connector for Using Remote Trigger with Housing
No posts found
