Ikelite 200DL Underwater Housing for Nikon Z6 III Mirrorless Digital Camera

Ikelite 200DL Overview

Capture brilliant images at depths as great as 200' with your Nikon Z6 III mirrorless digital camera in the 200DL Underwater Housing from Ikelite, which features their dry lock port mount and vacuum valve. An Ikelite bulkhead with a manual hot shoe connection enables reliable electrical triggering of optional external strobes via sync cords. Using an optional TTL hot shoe and the Nikon TTL converter will allow TTL operation with compatible Ikelite DS strobes non-Ikelite strobes will still work in manual mode only.

Ergonomic mechanical controls, including push buttons, dials, and levers, afford access to all essential camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS-plastic blend. It is white on the front, top, sides, and bottom, but it is clear on the back, so you can monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray has a left-hand quick release grip for improved balance and handling, and offers an attachment point for an optional lighting arm.

The housing ships without a required lens port and accepts various interchangeable dome and flat ports for a broad array of lenses. For full compatibility details, see the port chart. The DL port system accommodates lenses with large diameters, and provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. You'll need to pick up the required pump to remove excess air and create a vacuum.

Construction Details

• Depth rating of 200'
• Made by hand in the USA from corrosion-resistant polycarbonate and ABS-plastic blend
• White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water's surface
• Clear on the back to monitor the O-ring seal and maintain a view of the camera's rear controls
• Open-groove design suspends the rear O-ring in the natural position for easier maintenance and to prevent accidental twisting or stretching

Strobe Connection and Operation

• Ikelite bulkhead connector with a manual hot shoe connection enables reliable electrical triggering of strobes
• Optional DL1 DS Link TTL Converter #46054 enables TTL operation with compatible Ikelite DS strobes

Controls and Handling

• Extra-large, soft-touch zoom knob is located next to the grip handle
• Ergonomic mechanical push buttons, dials, and levers afford access to all camera functions except sub-selector up/down/left/right (press in is operational), Fn1, Fn2, diopter adjustment control
• Control symbols are laser-etched into the back of the housing, so they won't fade or fall off with time
• Hard anodized aluminum tray with a left-hand quick release grip affords improved balance and handling while offering an attachment point for an optional lighting arm

Lens Port System

• Ships without a required lens port
• Accepts all Ikelite Dry Lock (DL) dome and flat ports, allowing you to shoot with a wide variety of lenses
• Zoom gears are available for many lenses
• For complete compatibility details, see the port chart linked above
• DL port system accommodates lenses with large diameters
• Provides added security against leaks at the surface, thanks in large part to the included vacuum valve that helps you check watertight integrity before the dive
• #47011 pump is required to remove excess air and create a vacuum

EAN: 883711069579