Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Ikelite 200DLM/C Underwater Housing for Nikon D5500 & D5600 DSLR
EAN: 883711056562
Capture images of the underwater world with your Nikon D5500 or D5600 DSLR camera in this 200DLM/C Underwater Housing from Ikelite. The housing accepts interchangeable dome and flat ports for a broad array of lenses. For complete compatibility details, see the The enclosure is depth-rated for 200 . An Ikelite sync cord bulkhead with manual hot shoe enables the connection of optional external strobes. Ergonomic mechanical controls including push buttons, dials, and levers afford access to virtually all camera functions. Built for durability, the enclosure is from a corrosion-resistant polycarbonate and ABS plastic blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera s rear controls.
Construction Details
Controls and Handling
Lens Ports
Strobe Connection and Operation
EAN: 883711056562
Capture images of the underwater world with your Nikon D5500 or D5600 DSLR camera in this 200DLM/C Underwater Housing from Ikelite. The housing accepts interchangeable dome and flat ports for a broad array of lenses. For complete compatibility details, see the The enclosure is depth-rated for 200 . An Ikelite sync cord bulkhead with manual hot shoe enables the connection of optional external strobes. Ergonomic mechanical controls including push buttons, dials, and levers afford access to virtually all camera functions. Built for durability, the enclosure is from a corrosion-resistant polycarbonate and ABS plastic blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera s rear controls.
Construction Details
- Depth rating: 200
- Made by hand in the from a corrosion-resistant polycarbonate and ABS plastic blend
- White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water s surface
- Clear in the back to allow you to monitor the O-ring seal and camera
- Two double-passivated, stainless steel locking latches are virtually unbreakable and make it easy to open and close the housing
- Rear O-ring seal design and placement prevent accidental twisting or stretching, and eliminate the need for a groove that can trap sand, dirt, or debris
- 1/2-20 threaded accessory port on the side of the housing allows for the easy installation of an optional Vacuum Kit, which will allow you to confirm the integrity of the watertight seal before diving
- Camera is installed and removed through the front of the housing
- Mounting plate allows for secure camera placement, and does not need to be removed for you to access the battery compartment or memory card slot
- Mounting plate has a 1/4 -20 threaded hole for connection to a tripod
Controls and Handling
- Large ergonomic mechanical controls including push-buttons, dials, knobs, and levers afford access to all camera functions except for the diopter adjustment knob
- Soft knobs increase comfort and prevent your fingers from slipping when operating the most commonly used controls
- Curved shutter lever
- Corrosion-proof, smooth-action acetal buttons
- Laser-engraved control symbols on the back of the housing won t come off or fade with time
- Camera s large, bright LCD screen is fully visible from edge to edge through the rear of the housing
- Supereye Viewfinder gives you an enhanced view through the camera s OVF
- Two 1/4 -20 threaded mounts on the bottom of the housing allow for connection to an optional tray with grips, which improves balance and handling while adding attachment points for lighting arms
Lens Ports
- Housing accepts separately sold dome and flat ports for a broad array of lenses
- For complete compatibility details, see the DLM Type C Port Chart linked above
Strobe Connection and Operation
- Ikelite bulkhead with a manual hot shoe enables the connection of optional external strobes via sync cords
- For TTL functionality, use separately sold DL1 DS Link Nikon TTL Converter Ikelite NT3 Hot Shoe Kit #46056 and a compatible Ikelite DS strobe
Ikelite 200DLM/C Specs
| Depth Rating | 200` / 60 m |
| Port | Ikelite DLM/C |
| Material of Construction | Body: Polycarbonate and ABS Plastic Back Plate: Acrylic Small Parts: Acetal Plastic |
| External Flash Connector | Ikelite Bulkhead with Manual Hot Shoe Connection |
| Mounting | 1 x 1/4"-20 Tripod Mount on Camera Plate 2 x 1/4"-20 Tray Mounts on Bottom of Housing |
| Dimensions | 7.5 x 6.0 x 6.3" / 19.0 x 15.2 x 15.9 cm |
| Weight | 2.8 lb / 1.3 kg |
Packaging Info
| Package Weight | 3.655 lb |
| Box Dimensions (LxWxH) | 9.8 x 6.7 x 6.5" |
In the Box
- Ikelite 200DLM/C Underwater Housing for Nikon D5500 & D5600 DSLR
- Silicone Lubricant 1cc Tube
- 2-Year Manufacturer Warranty
No posts found
