Ikelite Underwater Housing for PowerShot G7 X Mark III Camera

Ikelite Underwater Housing for PowerShot G7 X Mark III Camera

EAN: 883711058580

Capture HD video and still images at depths to 200 with this Underwater Housing for PowerShot G7 X Mark III Camera. External strobes can be connected through two ports for Ikelite, SEA&SEA, or Olympus-type fiber-optic strobe cords. Any Ikelite DS strobe may be connected using the Fiber-Optic Converter #4401.3 and Fiber-Optic Cord #4501, both sold separately.

The housing comes with a 3 diameter optical glass port that accommodates the camera s full 24-120mm zoom range. A full range of optional, 67mm-threaded macro and wide-angle wet lenses and color filters attach directly to the port, and an optional 6 glass dome can be mounted on the housing to replace the port for wide-angle, macro and over-under shots. Built for durability, the housing is made in the USA from a corrosion-resistant ABS and polycarbonate blend, which is light gray/white on the front, sides, top, and bottom but clear in the back so you can monitor the O-ring seal and rear camera controls. The back panel is removable and allows for easy drop-in camera loading. Operating the shutter is easy thanks to the large curved lever, and if you decide to use the housing with a tray and right-side handle, a shutter-lever extension is available. Rotating controls feature stainless steel, direct-drive mechanisms and soft-touch knobs, while back-panel buttons are made of anodized aluminum with laser-engraved labels that won t fall off or fade. The camera s LCD is fully visible. A 1/2 port permits use of an optional vacuum testing pump, to verify the integrity of the seal before your dive.

Construction Details

• Features a depth rating of 200
• Two ports for connecting Ikelite, SEA&SEA, or Olympus-type fiber-optic cords
• Constructed by hand in USA from corrosion-resistant ABS and polycarbonate blend, light gray/off-white with clear back
• Color reflects sunlight to keep camera cool and offers better contrast for improved viewing of camera, monitor, and O-ring seal
• Open-groove O-ring design
• 1/2 -20 port for optional vacuum testing pump

Controls and Handling

• Access to all camera controls except flash pop-up
• Large curved shutter lever for easy operation
• Soft-touch knobs and stainless steel mechanisms for rotary controls, anodized aluminum push buttons
• Engraved back-panel control labels won t fade or fall off
• 1/4-20 threaded tray mounting with 3 spacing
• Slightly negative buoyancy in fresh water

Lens Port

• Built-in flat optical glass lens port with 3 diameter
• Accommodates camera s full 24-120mm zoom range
• Wide-angle and macro lenses, filters, and dome port available separately