Ikelite Underwater TTL Housing for Canon Rebel SL3

Ikelite Underwater TTL Housing for Canon Rebel SL3

EAN: 883711058047

Capture striking underwater images with your Canon EOS Rebel SL3 DSLR in Ikelite s 200DLM/C Underwater Housing with TTL Circuitry, which ships with the DLM Dome Port for select lenses. It also accepts optional, interchangeable dome and flat ports for a broad array of other lenses. For complete compatibility details, see the The enclosure features a depth rating of 200 . An Ikelite sync cord bulkhead and built-in TTL circuitry enable the connection of optional external strobes.

Ergonomic mechanical controls, including push buttons, dials, and levers, afford access to virtually all camera functions. Built for durability, the enclosure is from a corrosion-resistant polycarbonate and ABS plastic blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera s rear controls. An optional aluminum tray with a quick release grip or two will afford improved balance and handling, while offering a way to attach optional lighting arms.

Construction Details

• Depth rating: 200
• Made by hand in the from a corrosion-resistant polycarbonate and ABS plastic blend
• White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water s surface
• Clear in the back to allow you to monitor the O-ring seal and camera
• Two double-passivated, stainless steel locking latches are virtually unbreakable and make it easy to open and close the housing
• Rear O-ring seal design and placement prevent accidental twisting or stretching, and eliminate the need for a groove that can trap sand, dirt, or debris
• 1/2-20 threaded accessory port on the side of the housing allows for the easy installation of an optional Vacuum Kit, which will allow you to confirm the integrity of the watertight seal before diving
• Camera is installed and removed through the front of the housing
• Mounting plate allows for secure camera placement, and does not need to be removed for you to access the battery compartment or memory card slot
• Mounting plate has a 1/4 -20 threaded hole for connection to a tripod

Controls and Handling

• Large, ergonomic, mechanical controls, including push buttons, dials/knobs, and levers, afford access to all camera functions except for the diopter adjustment knob, display button, Wi-Fi button, depth-of-field preview, and flash button
• Laser-engraved control symbols on the back of the housing won t come off or fade with time
• Camera s LCD screen is fully visible from edge to edge through the rear of the housing
• Supereye Viewfinder gives you an enhanced view through the camera s OVF and can be replaced quickly and easily by the optional Straight or 45° & Magnified Viewfinder

Lens Ports

• Ships with DLM Dome Port and zoom gear for Canon EF-S 18-55mm f/4-5.6 STM kit lens
• Durable Delrin acetal resin body is resistant to corrosion
• Housing accepts optional, interchangeable dome and flat ports for a broad array of other lenses
• For complete compatibility details, see the DLM Type C Port Chart linked above

Strobe Connection and Operation

• Ikelite bulkhead with a hot shoe connection and built-in TTL circuitry enable the connection of optional external strobes via sync cords
• Circuit is powered by the strobe, so there are no batteries to change and there is no maintenance to be done
• Exposure compensation in TTL mode is supported using the camera s built-in control
• Ikelite DS strobes DS50 (above serial number 70000), DS51, DS125 (above serial number 5000), DS160, DS161, and DS200 (above serial number 7163) are operable in TTL or manual mode
• Third-party strobes and non-digital Ikelite strobes are not compatible