Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Platinum Tools VDV MapMaster 3.0 Cable Tester
EAN: 849160008750
The VDV MapMaster 3.0 Cable Tester from Platinum Tools is designed to be your all-in-one tester for installation and troubleshooting of phone, network, and coaxial cable runs. The handheld tester is made to work in a variety of locations with its backlit display, glow-in-the-dark keypad, and built-in flashlight. Wherever your wiring is located, this versatile tester is engineered to give you essential information about your cabling.
It can detect problems, such as open, shorts, miswires, reverses, and split pairs. It can also tell you the length of connected cables in feet and meters, which is a handy feature for diagnosing exactly where a fault may be located. These are just a few highlights of what the MapMaster 3.0 has to offer. Continue for a full list of its capabilities.
Additional Features
EAN: 849160008750
The VDV MapMaster 3.0 Cable Tester from Platinum Tools is designed to be your all-in-one tester for installation and troubleshooting of phone, network, and coaxial cable runs. The handheld tester is made to work in a variety of locations with its backlit display, glow-in-the-dark keypad, and built-in flashlight. Wherever your wiring is located, this versatile tester is engineered to give you essential information about your cabling.
It can detect problems, such as open, shorts, miswires, reverses, and split pairs. It can also tell you the length of connected cables in feet and meters, which is a handy feature for diagnosing exactly where a fault may be located. These are just a few highlights of what the MapMaster 3.0 has to offer. Continue for a full list of its capabilities.
Additional Features
- Master remote control is stored inside the main unit
- Tests to T568A/B wiremap configuration for shorts, opens, miswires, reverses, and split pairs
- Single-ended testing for shorts and split pairs
- Identifies cable location on active ports using a flashing port link light
- Verifies continuity for LAN, phone, and video cabling
- Audible beep for additional feedback
- Four selectable cadences for the audible tone generator
- Identify up to 20 network or coaxial cable runs at a time
- Measures distance to opens and breaks in specific wires, pairs of wires, or all wires simultaneously
- Voltage detection warning icon
- Continuous loop test mode
- Automatic shutoff and timed backlight in any mode to preserve battery life
Platinum Tools T130 Specs
| Display | 2.75" Backlit Monochrome LCD |
| Maximum Voltage | RJ-12/RJ45/F: 50 VDC or VAC (Between any Tow Connector Pins without Damage) |
| Battery | 9 Volts |
| Battery Life | Standby: Up to 4 Years Active: Up to 425 Hours |
| Cable Types | Cat 7, Cat 6A, Cat 5e, Cat 5, Cat 4, Cat 3, and Coax (Shielded or Unshielded) |
| Cable Length | Maximum RJ Cable Length Testing: 0-1000` / 0-305 m Minimum for Split Pair Detection: 1.5` / 0.5 m Maximum Coax: Varies Depending on Cable Resistance |
| Low Battery Alert | Icon Flashes when Battery Voltage Falls Below 6 V |
| Measurement Method | Capacitance Testing |
| Other | Length Accuracy without Length Constant: ±3% Plus 1` / 0.3 m Default Length Constant (Restored with Power On Reset) Voice (Twisted Pair): 17.4 pF/ft Video (Coax): 16.5 pF/ft Data (Twisted Pair): 15 pF/ft |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Humidity (Non-Condensing) | 10% to 90% |
| Dimensions | 6.8 x 3.2 x 1.4" / 17.3 x 8.1 x 3.6 cm |
| Weight | 10.8 oz / 306.2 g (with Battery & Remote) |
Packaging Info
| Package Weight | 1.02 lb |
| Box Dimensions (LxWxH) | 9.75 x 4.38 x 2.13" |
In the Box
- Platinum Tools VDV MapMaster 3.0 Cable Tester
- 2-Year Manufacturer Warranty
No posts found
