Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
RDL TX-8A4 and 8 Ohm Input Interface
EAN: 813721016294
The RDL TX-8A4 Ohm/8 Ohm Input Interface is a mono audio transformer that can convert the output of a 4 or 8 Ohm amplifier into a line level input to be sent to an audio mixer or second amplifier. The transformer s frequency response extends low enough to make it suitable for feeding a subwoofer amplifier input. For situations when interfacing between a stereo output to a subwoofer input, two TX-8Amodules may be used, one from each side of the stereo output signal, with their inputs combined as the subwoofer input.
The front panel level control of the transformer allows you to adjust the input power voltage to -10 dBV or +4 dBu. The unit can handle between 0.5 and 400 W of operational power and can be wired to output either balanced or unbalanced signals.
For easy wiring, the unit features detachable terminal block connections. To couple the audio input to the audio output, the transformer features bifilar coil windings. To prevent ground loops, the device is built with galvanic isolation. For convenience, the transformer may be mounted on the sides of a rack or on the rack rails using RDL s optional TX mounting accessories.
EAN: 813721016294
The RDL TX-8A4 Ohm/8 Ohm Input Interface is a mono audio transformer that can convert the output of a 4 or 8 Ohm amplifier into a line level input to be sent to an audio mixer or second amplifier. The transformer s frequency response extends low enough to make it suitable for feeding a subwoofer amplifier input. For situations when interfacing between a stereo output to a subwoofer input, two TX-8Amodules may be used, one from each side of the stereo output signal, with their inputs combined as the subwoofer input.
The front panel level control of the transformer allows you to adjust the input power voltage to -10 dBV or +4 dBu. The unit can handle between 0.5 and 400 W of operational power and can be wired to output either balanced or unbalanced signals.
For easy wiring, the unit features detachable terminal block connections. To couple the audio input to the audio output, the transformer features bifilar coil windings. To prevent ground loops, the device is built with galvanic isolation. For convenience, the transformer may be mounted on the sides of a rack or on the rack rails using RDL s optional TX mounting accessories.
RDL TX-8A Specs
| Input Connector | 1 x Barrier block |
| Minimum Input Level | For +4 dBu output: 8 W at 8 © or 16 W at 4 © For -10 dBV output: 0.5 W at 8 © or 1 W at 4 © |
| Maximum Input Level | 400 W |
| Attenuation | 16 dB to 34 dB (input to output) |
| Output Connector | 1 x Barrier block |
| Output Level | -10 dBV unbalanced or +4 dBu balanced, adjustable (10 k© load) |
| Isolation | Galvanic bifilar wound audio transformer |
| Frequency Response | 20 to 20,000 Hz (± 0.75 dB) |
| THD | <0.1% (1 kHz); <1% (20 to 20,000 Hz) |
| Power Requirement | Passive |
| Dimensions | 3.0 x 1.2 x 1.5" (7.6 x 3.0 x 3.8 cm) |
| Weight | 0.32 lb (145.15 g) |
Packaging Info
| Package Weight | 0.41 lb |
| Box Dimensions (LxWxH) | 4.1 x 2.1 x 2" |
In the Box
- RDL TX-8A 4 and 8 Ohm Input Interface
No posts found
