Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
RDL ST-RX2 - 1x2 Audio Routing Switch
EAN: 813721011794
The ST-RX2 is a one-in, two-out line-level routing switch and a part of the Stick-On line from RDL. Anywhere you need to send an audio signal to one of two destinations, the ST-RX2 is an ideal companion. It offers solid-state switching to route the signal to one of the balanced outputs with an off attenuation better than 80dB at all frequencies no relays or mechanical devices are used.
The ST-RX2 uses soft switching to eliminate any clicks or pops. The unit can be controlled by almost any source from switches to logic circuits thanks to its minimal required control current. It may also be controlled by the RC2-ST, RT2 or RUC-4 remote controls from RDL.
Routes a line-level source to one of two destinations
Compact form factor
Silent audio switching
Balanced or unbalanced routing
Switching by open-collector logic
EAN: 813721011794
The ST-RX2 is a one-in, two-out line-level routing switch and a part of the Stick-On line from RDL. Anywhere you need to send an audio signal to one of two destinations, the ST-RX2 is an ideal companion. It offers solid-state switching to route the signal to one of the balanced outputs with an off attenuation better than 80dB at all frequencies no relays or mechanical devices are used.
The ST-RX2 uses soft switching to eliminate any clicks or pops. The unit can be controlled by almost any source from switches to logic circuits thanks to its minimal required control current. It may also be controlled by the RC2-ST, RT2 or RUC-4 remote controls from RDL.
Routes a line-level source to one of two destinations
Compact form factor
Silent audio switching
Balanced or unbalanced routing
Switching by open-collector logic
RDL ST-RX2 Specs
| Switching Time | Normal Output Off: 10 us (Fast) 5 ms (Soft) Normal Output On: 15 us (Fast) 70 ms (Soft) Select Output Off: 15 us (Fast) 10 ms (Soft) Select Output On: 20 us (Fast) 35 ms (Soft) |
| Control Signal | "Trig" Terminal Must be Externally Connected to Ground |
| Control Current | 0.5mA |
| Headroom | > 18dB (Above +4 dBu) |
| THD + N | < 0.03% (1kHz) |
| Common Mode Rejection Ratio | > 45dB (100Hz) |
| Frequency Response | 15Hz to 20kHz (+/- 0.5dB into 10 k ohms Bridging Input) 30Hz to 20kHz (+/- 0.5dB into 600 ohms) |
| Noise | < -85dB (Below +4 dBu Unweighted) -90dB (Typical) |
| On Gain | Unity (Balanced Input and Output) |
| Off Attenuation | > 80dB (Either Output) > 95dB at 1kHz |
| Indicators | 2 x Output LEDs |
| Power Requirements | 24 to 33 VDC @ 40mA (Ground-Referenced) |
| Dimensions | 1.55 x 3 x 0.65" (39 x 76 x 17 mm) |
Packaging Info
| Package Weight | 0.2 lb |
| Box Dimensions (LxWxH) | 16 x 11.6 x 2.9" |
In the Box
- RDL ST-RX2 - 1x2 Audio Routing Switch
- 3-Year Manufacturer Warranty
Not in the Box
- Essential
No posts found
