EAN: 654061041122
The P-8 Pro C from Furman is a Classic Series Power Conditioner in a sturdy rack-mountable design. It can be utilized as a voltage surge suppressor for instrument rigs, recording studios, DJ setups, live sound installations, and more.
The P-8 Pro C power conditioner has the following three stages of protection: Series Multi-Stage Protection (SMS), Linear Filtering Technology (LIFT), and Extreme Voltage Shutdown (EVS). Together they provide a comprehensive transient voltage surge suppressor system to protect your gear.
There are several other built-in features of the P-8 Pro C such as the 20 Amp rating, nine total AC outlets, a BNC lamp connector on the rear panel, isolated outlet banks, three widely spaced wall wart outlets, and LED diagnostic lights.
Instrument Rigs
The P-8 Pro C Power Conditioner defends your gear from the spikes and surges that are so common at gigs and practice spots. With its Linear Filtering Technology, you ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp
Recording
It can lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman s Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges
DJ Equipment
Bars, clubs, and other event venues have some of the most unpredictable power out there. From air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. The P-8 Pro C Power Conditioner keeps the bad stuff out
Pro Audio
When you re out there gigging, you never know what kind of power you re going to get. Whether you re setting up a show at the local club or powering up the church band for their next service, make sure you give them the power they can trust
Furman PRO C Specs
Form Factor | Rackmount |
Type | Distributor |
Metering | None |
Integrated Lamps | Yes |
Connections
Outlets | 8 |
Lamp I/O | 1 x BNC (Rear Panel, with Switch, Lamp Not Included) |
Electrical
AC Input Power | 90 to 140 VAC, 50 / 60 Hz |
Lamp Power | 12 VDC at 500 mA (Max) |
Protection & Conditioning
Overvoltage Protection | 140 V |
Clamping Voltage | 188 V at 3000 A (Line to Neutral) |
Maximum Spike Current | 6500 A |
EMI/RFI Noise Filtration | 10 dB (10 kHz, Linear Attenuation) 40 dB (100 kHz, Linear Attenuation) 100 dB (10 kHz, Linear Attenuation) |
Environmental
Certifications | UL, CE, NRTL *as per Manufacturer |
Physical
Dimensions | 19 x 10.5 x 1.75" / 48 x 27 x 4.4 cm |
Weight | 11 lb / 5 kg |
Packaging Info
Package Weight | 12.3 lb |
Box Dimensions (LxWxH) | 21.8 x 14.6 x 4.1" |
In the Box
- Furman P-8 Pro C Power Conditioner
- 3-Year Manufacturer Warranty
No posts found