Triad-Orbit SM-SW1 Modular Speaker Hanging Solution for Genelec One Series/8030 Speaker Kit

SM-SW1 Modular Speaker Hanging Solution for Genelec One Series/8030 Speaker Kit Overview

This Triad-Orbit SM-SW1 Modular Speaker Hanging Solution Kit is designed for cloud drop hanging a Genelec One Series, Genelec 8030, or smaller Genelec powered speaker on a ceiling or extending it off a wall. The kit includes an SM-SW1 speaker mount swivel to securely position the speaker, two SM-PM1 cloud drop pipe mounting plates, an SM-WM1 slide-in wall mounting plate, and an SM-GP mounting plate for Genelec speakers. Pre-adjust pan at 30° increments and tilt at 15° increments.

Triad-Orbit SM-PM1 Cloud Drop Pipe Mounting Plate

The Triad-Orbit SM-PM1 is a mounting plate with a 3/4" threaded hole that accommodates a standard 3/4" NTS pipe, making it ideal for cloud drop hanging speakers or extending them off of walls. It can either slide into the Triad-Orbit SM-WM1 wall plate or screw into the SM-SW1 swivel (SM-WM1 and SM-SW1 available separately).

Note:

Two SM-PM1 plates are necessary for pipe mounting one to attach to the wall/ceiling, and the second to attach to the SM-SW1.

EAN: 813985004716

Triad-Orbit SM-SW1 Speaker Mount Swivel for SM-1 System

The Triad-Orbit SM-SW1 is the main pan and tilt swivel designed for Triad-Orbit s SM-1 Dolby Atmos speaker wall-mounting system. It can connect directly to speakers with a 50 to 80mm dual hole pattern or accept the versatile array of Triad-Orbit s speaker mounting plates. The SM-SW1 features 180° of tilt 90° forward and 90° back adjustable in 15° increments. The locking spring pin and tension knobs keep the SM-SW1 securely held in the desired position.

• Accommodates speaker mounting plates in the Triad-Orbit Precision AV Atmos Speaker Mount System series
• Connects directly to speakers that have a dual hole pattern (50 to 80mm)
• Spring pins in 15° increments
• Secondary tension locks in both tilt and pan axis

EAN: 813985004730

Triad-Orbit SM-WM1 Slide-In Wall Mounting Plate

The Triad-Orbit SM-WM1 is a slide-in plate for wall- or ceiling-mount Dolby Atmos speaker setups using Triad-Orbit s SM-SW1 swivel or SM-PM1 pipe mounting plate, either of which easily slides into the SM-WM1 and secures with hex screws. The SM-WM1 can be screwed into a wall or ceiling and greatly simplifies installation of speaker systems.

• Accepts the Triad-Orbit SM-SW1 swivel or the SM-PM1 pipe mounting plate
• SM-SW1 or SM-PM1 (both available separately) slides into the SM-WM1 mount and secures by four hex screws
• Allows a speaker to be attached to an SM-SW1 swivel before the assembly is slid in the SM-WM1 mounting plate
• For use with Triad-Orbit Precision AV Atmos Speaker Mount System hardware

EAN: 813985004747

Triad-Orbit SM-GP Speaker Mounting Plate for Genelec Studio Monitors

The Triad-Orbit SM-GP is a speaker mounting plate designed for attaching a Genelec One Series or smaller Genelec studio monitor to a Triad-Orbit SM-SW1 swivel (available separately) in Dolby Atmos speaker setups. It features four holes with 127 x 70mm spacing, four holes with 108 x 51mm spacing, and easy installation attach it to the SM-SW1, then slide the assembly into an SM-WM1 wall/ceiling mount (available separately).

EAN: 813985004846