Triad-Orbit SM-SW1 Modular Speaker Hanging Solution for JBL 7 Series Speaker Kit

SM-SW1 Modular Speaker Hanging Solution for JBL 7 Series Speaker Kit Overview

This Triad-Orbit SM-SW1 Modular Speaker Hanging Solution Kit is designed for cloud-drop hanging a JBL 7 Series speaker (such as the 708i/708P or 705i/705P) on a ceiling or extending it off a wall. The kit includes an SM-SW1 speaker mount swivel to securely position the speaker, two SM-PM1 cloud-drop pipe-mounting plates, an SM-WM1 slide-in wall mounting plate, and an SM-7iP plate to mount the JBL speaker onto the swivel. Preadjust pan at 30° increments and tilt at 15° increments.

Triad-Orbit SM-PM1 Cloud Drop Pipe Mounting Plate

The Triad-Orbit SM-PM1 is a mounting plate with a 3/4" threaded hole that accommodates a standard 3/4" NTS pipe, making it ideal for cloud drop hanging speakers or extending them off of walls. It can either slide into the Triad-Orbit SM-WM1 wall plate or screw into the SM-SW1 swivel (SM-WM1 and SM-SW1 available separately).

Note:

Two SM-PM1 plates are necessary for pipe mounting one to attach to the wall/ceiling, and the second to attach to the SM-SW1.

EAN: 813985004716

Triad-Orbit SM-SW1 Speaker Mount Swivel for SM-1 System

The Triad-Orbit SM-SW1 is the main pan and tilt swivel designed for Triad-Orbit s SM-1 Dolby Atmos speaker wall-mounting system. It can connect directly to speakers with a 50 to 80mm dual hole pattern or accept the versatile array of Triad-Orbit s speaker mounting plates. The SM-SW1 features 180° of tilt 90° forward and 90° back adjustable in 15° increments. The locking spring pin and tension knobs keep the SM-SW1 securely held in the desired position.

• Accommodates speaker mounting plates in the Triad-Orbit Precision AV Atmos Speaker Mount System series
• Connects directly to speakers that have a dual hole pattern (50 to 80mm)
• Spring pins in 15° increments
• Secondary tension locks in both tilt and pan axis

EAN: 813985004730

Triad-Orbit SM-WM1 Slide-In Wall Mounting Plate

The Triad-Orbit SM-WM1 is a slide-in plate for wall- or ceiling-mount Dolby Atmos speaker setups using Triad-Orbit s SM-SW1 swivel or SM-PM1 pipe mounting plate, either of which easily slides into the SM-WM1 and secures with hex screws. The SM-WM1 can be screwed into a wall or ceiling and greatly simplifies installation of speaker systems.

• Accepts the Triad-Orbit SM-SW1 swivel or the SM-PM1 pipe mounting plate
• SM-SW1 or SM-PM1 (both available separately) slides into the SM-WM1 mount and secures by four hex screws
• Allows a speaker to be attached to an SM-SW1 swivel before the assembly is slid in the SM-WM1 mounting plate
• For use with Triad-Orbit Precision AV Atmos Speaker Mount System hardware

EAN: 813985004747

Triad-Orbit SM-7iP Speaker Mounting Plate for JBL 7 Series Install Monitors

The Triad-Orbit SM-7iP is a speaker mounting plate designed for attaching a JBL 7 Series passive install monitor such as the 705i or 708i to a Triad-Orbit SM-SW1 swivel (available separately) in Dolby Atmos speaker setups. It features four 50mm holes, four 80mm slots, support for vertical or horizontal monitor orientation, and easy installation attach it to the SM-SW1, then slide the assembly into an SM-WM1 wall/ceiling mount (available separately).

EAN: 813985004693