Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Rycote Microphone Protector Case (11.8`)
The 11.8` Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots. The exterior of the PVC case is covered in 600D oxford nylon and red fabric lines the interior. Like the nylon covering, the zipper closure is water-resistant. Sheath your microphones with the three supplied PVC mic tubes, which telescope from 7.9 to 13.4` and include foam inserts to optimize the fit. The included carabiner clip conveniently hooks through the webbed carry loop for easy transport or attachment to a belt or pack.
Tough, water-resistant case holds up to three small-diaphragm microphones
Tubular 1/8`-thick PVC case covered in heavy-duty 600D oxford nylon and lined with red fabric
Water-resistant, zip-fastening system with easy-pull toggle
Silica gel sachets included to help ensure a healthy climate for your microphones
Webbed carry loop
Handy lightweight carabiner for quick and secure fastening
Telescopic PVC microphone tubes utilize a threaded design to allow extension from 7.9 to 13.4`
Use the supplied foam inserts-four per mic tube- to help cushion the microphone within the tube or separate multiple smaller microphones within a single tube
Hexagonal end on each mic tube prevents your valuable microphone from rolling off flat surfaces
Compatible microphones include:
Audio-Technica AT4073, BP4073, AT897, AT875R, AT877
Azden: SGM-X, SGM-2X
Beyerdynamic: MCE 85 BA
DPA: 4017b
Neumann: KMR 81i, KMR-81D
Rode: NTG-2, NTG-3, NTG-4, NTG-4+
Sanken: CS-2, CS-3e, CSS-50
Schoeps: CMC series + Cut 1 filter, CMIT 5 U, SuperCMIT
Sennheiser: MKH 416, MKE 600, MKH 60
Shure: SM81, VP89S
Sony: ECM-670, ECM-678
The 11.8` Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots. The exterior of the PVC case is covered in 600D oxford nylon and red fabric lines the interior. Like the nylon covering, the zipper closure is water-resistant. Sheath your microphones with the three supplied PVC mic tubes, which telescope from 7.9 to 13.4` and include foam inserts to optimize the fit. The included carabiner clip conveniently hooks through the webbed carry loop for easy transport or attachment to a belt or pack.
Tough, water-resistant case holds up to three small-diaphragm microphones
Tubular 1/8`-thick PVC case covered in heavy-duty 600D oxford nylon and lined with red fabric
Water-resistant, zip-fastening system with easy-pull toggle
Silica gel sachets included to help ensure a healthy climate for your microphones
Webbed carry loop
Handy lightweight carabiner for quick and secure fastening
Telescopic PVC microphone tubes utilize a threaded design to allow extension from 7.9 to 13.4`
Use the supplied foam inserts-four per mic tube- to help cushion the microphone within the tube or separate multiple smaller microphones within a single tube
Hexagonal end on each mic tube prevents your valuable microphone from rolling off flat surfaces
Compatible microphones include:
Audio-Technica AT4073, BP4073, AT897, AT875R, AT877
Azden: SGM-X, SGM-2X
Beyerdynamic: MCE 85 BA
DPA: 4017b
Neumann: KMR 81i, KMR-81D
Rode: NTG-2, NTG-3, NTG-4, NTG-4+
Sanken: CS-2, CS-3e, CSS-50
Schoeps: CMC series + Cut 1 filter, CMIT 5 U, SuperCMIT
Sennheiser: MKH 416, MKE 600, MKH 60
Shure: SM81, VP89S
Sony: ECM-670, ECM-678
No posts found
