The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base.
The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing.
This unit has an A4M Telex headset jack and works on E88: 590 to 608 MHz Transmit / 470 to 488 MHz Receive frequencies.
Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18 MHz bands
Factory-selected preset frequency groups, 1000` operating range, Transmit power level switch
Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front-panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically
Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability
Simultaneous support of up to 4 beltpacks, expandable
Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment
Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls, allows for fifth simultaneous user (director, producer, or engineer) on intercom channel
Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLR and 4-wire RJ-11 connectors
Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
EAN: 701001015610
Telex BTR-800 Specs
| General System | |
| System Modulation | FM |
| Frequency Range | E88: 590 to 608 MHz Transmit / 470 to 488 MHz Receive |
| Power | 100-240VAC, 50/60Hz, IEC Receptacle |
| Battery Life | Not Applicable |
| Charging Time | Not Applicable |
| FCC License | Part 74 License Required |
| Transmitter | |
| Output | 100mW Max |
| Deviation | 40kHz |
| Modular Distortion | <1% @ Full Deviation |
| Receiver | |
| Image Rejection | > 70dB |
| Controls and Indicators | Front Panel: 1 x Power Switch 2 x Menu and Set Buttons 2 x Up and Down Buttons 4 x Portable Station Enable/Disable Buttons 3 x 2-Wire, 4-Wire, Select Wired Intercom Control LED Buttons 2 x Intercom In/Out Switches 2 x Auxiliary Interface Enable LED Buttons 2 x Auxiliary In/Out Switches 1 x Headset Volume Control 1 x Headset Microphone Gain Control 1 x Talk Button 1 x Backlit LCD Display 1 x Talk/Overmod LED Indicator 4 x Portable Station Status LED Indicators Rear Panel: 1 x Transmit Power High/Norm Switch 1 x Transmit On/Off Switch 1 x 3-way Telex, RTS, Clear-Com I/C Select Switch |
| Connectors | Front Panel: 1 x A4M Telex Rear Panel: 2 x Female Color-Coded TNC Transmit/Receive Connectors 2 x Male/Female 3-pin XLR 2-Wire Intercom Connectors 1 x RJ-11 Base Station Link Jack 2 x Male/Female 3-pin XLR Auxiliary Audio I/O Connectors 1 x 3-pin XLR Male Stage Announce Out 1 x IEC Power Receptacle |
| Antenna | 2 x 1/2 Wave, TNC Connector |
| Dimensions | 19 x 1.7 x 14" (483 x 44 x 356mm) |
Packaging Info
| Package Weight | 11.15 lb |
| Box Dimensions (LxWxH) | 22.4 x 16.2 x 5" |
In the Box
- Telex BTR-800 2-Channel UHF Base Station with A4M Telex Headset Jack (E88: 590 to 608 MHz Transmit / 470 to 488 MHz Receive)
- Power Cord
- 2 x Antennas
- Screwdriver
- 2 x SA Relay Terminal Plugs
- 4 x Rubber Feet
- Owner`s Manual
- Warning Card
- 3-Year Manufacturer Warranty
No posts found
