The Sennheiser HMD 26-II-100 Professional Broadcast Headset is designed for demanding broadcast applications in the studio or outdoors. This configuration includes a detachable cable with both a 1/4" TRS connector and an XLR connector.
Sennheiser HMD 26-II-100 Professional Broadcast Headset with Dynamic Microphone (No Cable)
The Sennheiser HMD 26-II-100 Professional Broadcast Headset is designed for demanding broadcast applications in the studio or outdoors. The lightweight design offers extra-soft cushions and headband padding for long-lasting comfort during long production days. The closed-back supra-aural ear cups provide high SPL with solid passive noise attenuation. The HMD 26-II features an ActiveGard limiter, which provides protection for sudden volume peaks above 105 dB and can be activated or deactivated.
The integrated dynamic hypercardioid microphone features professional acoustic performance, reliable noise suppression, and a shock-mounted capsule for absorbing structure bone noise. The short, flexible part of the boom ensures the correct positioning of the microphone. The Sennheiser HMD 26-II-100 is compatible with a wide variety of optional accessories and includes a cable clip, large headband padding, and a wind/pop screen. The headphones do not include a cable, which is required for operation.
- Lightweight with extra-soft cushions for excellent wearing comfort
- Accurate and linear sound reproduction for professional Radio and TV applications
- Microphone provides audio transmission in broadcast quality
- ActiveGard (on/off switch) for protected hearing
- Reliable performance over long lifetime for safe investments
- Swiveling ear cap for single sided listening
- Microphone can be worn either on right- or left-hand side
- Modular concept of different optional cables and cushions for highest flexibility
EAN: 615104246423
Sennheiser CABLE-II-X3K1 Cable with XLR & 1/4" Connectors for HMD26/46 Headsets (6.6`)
The 6.6` CABLE-II-X3K1 Straight Copper Cable from Sennheiser features a short coil to minimize structure born noise. It is reinforced with Kevlar for durability and features an XLR connector and a 1/4" jack plug. This cable is suitable for use with the HMD26 and HMD46 headsets.
EAN: 615104246300
Sennheiser HMD 26-II-100 Professional Broadcast Headset with Dynamic Microphone (No Cable) Specs
Headphone
| Earpiece Design | On-Ear (Supra-Aural), Closed-Back |
| Number of Earpieces | Dual Earpiece |
| Driver Type | Dynamic |
| Impedance | 50 Ohms (Mono) 100 Ohms (Stereo) |
| Frequency Response | 20 Hz to 18 kHz |
| Maximum Sound Pressure Level (SPL) | 128 dB at 1 kHz |
| Total Harmonic Distortion (THD) | 0.5% |
Microphone
| Type | Dynamic |
| Pickup Pattern | Hypercardioid |
| Frequency Response | 40 Hz to 16 kHz |
| Sensitivity | .4 mV/Pa |
| Impedance | 300 Ohms |
Environmental
| Operating Temperature | 5 to 131°F / -15 to 55°C |
| Storage Temperature | -67 to 158°F / -55 to 70°C |
Physical
| Weight | 7.1 oz / 200 g |
Packaging Info
| Package Weight | 1.095 lb |
| Box Dimensions (LxWxH) | 9.8 x 7.4 x 3.3" |
Sennheiser CABLE-II-X3K1 Cable with XLR & 1/4" Connectors for HMD26/46 Headsets (6.6`) Specs
| Compatible With | HMD26 and HMD46 Headsets |
| Cable | Copper |
| Termination | 1 x 3-Pin XLR Male 1 x 1/4" / 6.3 mm Male TRS Proprietary Headset Connector |
| Length | 6.6` / 2.0 m |
Packaging Info
| Package Weight | 0.35 lb |
| Box Dimensions (LxWxH) | 6.85 x 5.9 x 1.55" |
In the Box
- Cable Clip
- Large Headband Padding
- Wind / Pop Screen
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found
