The CellTap 4C Wireless Phone Audio Tap Adapter from JK Audio is a passive device designed to allow you to record phone calls for interview and archival purposes. It s intended to be used in conjunction with a recording device or mixer.
Using a 3.5mm TRRS cable, you can route your phone s headset output into the Phone jack of the CellTap 4C. Then plug your TRRS-compatible headset into the jack marked, " Headset." Finally, connect the Record jack to a mic-level input on your recording interface or mixer to capture a stereo recording. The transformer coupled stereo output provides your microphone s audio on the left channel and the caller on the right channel, allowing you to split the signal and mix accordingly in a host DAW if you so choose.
Note:
A TRRS headset is required for operation.
Screwdriver caller-level adjustment
Switch selects between popular TRRS configurations
Passive, no AC or battery power needed
Made in USA
EAN: 814170010031
JK Audio CELLTAP4C Specs
| Connectors | 3.5 mm TRRS phone jack, headset input 3.5 mm TRRS phone jack, cable to device input 3.5 mm TRS phone jack, stereo microphone level output |
| Control | Internal switch, TRRS configuration setting |
| Output Impedance | 600 Ohms |
| Voltage | 2.4 mV RMS |
| Level | -50 dBu nominal |
| Dimensions | 2 x 2 x 1.3" / 5.1 x 5.1 x 3.3 cm |
| Weight | 3.5 oz / 99.2 g |
Packaging Info
| Package Weight | 0.46 lb |
| Box Dimensions (LxWxH) | 5.95 x 3.4 x 2.35" |
In the Box
- JK Audio CellTap 4C Wireless Phone Audio Tap Adapter
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
