RODE NTG3B Moisture-Resistant Shotgun Mic & Rycote Super-Shield Windshield Kit (Black)

Ideal for boompole-mounted operation in outdoor film/TV production, broadcast, and sound design applications, this Kit combines the black Rode NTG3B moisture-resistant shotgun microphone with a Rycote Super-Shield windshield system complete with a short XLR cable and a windjammer to create a professional-quality mic setup with effective protection from shock, vibration, and extreme wind noise.

RODE NTG3B Moisture-Resistant Shotgun Microphone (Black)

Capture broadcast-quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the black Rode NTG3B moisture-resistant shotgun microphone. Professional-level features such as low-noise circuitry, upgraded immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in postproduction.

The NTG3B`s high sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG3B delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. The solid brass housing is both durable and lightweight, and its anti-glare finish prevents reflections in the shot.

Designed to Withstand Adverse Environmental Conditions

When your work takes you outdoors, you`re bound to encounter humidity and condensation, which can cause many mics to fail. The NTG3B`s RF bias technology makes it almost completely resistant to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions. It also includes a weatherproof aluminum storage cylinder for maximum protection during travel.

Broadcast-Quality Sound

The NTG3B was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

The combination of the NTG3B`s 10" long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.

Phantom Powered

Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the NTG3B is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

The NTG3B includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG3B in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.

Windscreen Minimizes Wind Noise

The NTG3B has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).

EAN: 698813002696

Rycote Super-Shield Kit for Shotgun Mics (Medium)

The medium Super-Shield Kit for Shotgun Mics from Rycote is a complete windshield and shock mounting system for shotgun microphones 20-25cm in length. The kit contains the Super-Shield Suspension which provides your microphone isolation from shocks and vibrations, the Super-Shield Windshield which provides wind-noise reduction with minimal high-frequency loss, and the Windjammer, a high-quality synthetic fur cover which provides protection against extreme wind noise.

The Super-Shield Suspension features patented Lyre technology, which provides your microphone isolation from shocks and vibrations without the use of rubbers or elastic. The chassis fits microphones 19mm (3/4") to 25mm (1") in diameter, using two snap-in, pinch-release Lyre suspensions that can be used in any of six positions to achieve the optimal balance and fit. The suspension comes with an 18" (450mm) high flexibility microphone cable.

Made up of two lightweight, durable baskets made from flexible grey plastic netting with a screening material attached, the Super-Shield Windshield connects to the Super-Shield Suspension. The windshield completely surrounds and creates a still volume of air around the microphone, which is designed to provide wind-noise reduction, with minimal high-frequency loss.

The Super-Shield Windjammer is a synthetic fur cover which provides another layer of protection to be used to combat extreme wind noise. Like the Super-Shield Windshield, it is designed to protect from wind without substantial high-frequency loss.

Fits these and similar sized mics:

• Audio-Technica AT 4073a (BP4073)
• DPA 4017
• Neumann KMR 81i
• Neumann KMR-81D
• RODE NTG-1
• RODE NTG-3
• RODE NTG4
• Sanken CS 2
• Schoeps CMIT 5U
• Sennheiser MKH 416
• Shure VP82
• Shure VP89S
• Sony ECM 670
• Sony ECM 678