Sanken CS-M1 Moisture-Resistant Ultracompact Shotgun Microphone

Little more than half the length of the CS-1e, the Sanken CS-M1 moisture-resistant ultracompact shotgun microphone is designed for capturing dialogue, foley, and sound effects in sterling sound quality while always staying out of the shot. Compared to the CS-1e, the CS-M1 is advantageous when used on close-range sources that don`t produce extended bass frequencies.

For independent and major film, television, and location recording gigs where you need a space-saving mic that remains a featherweight on boompoles or short-lens cameras, the CS-M1 is ideal. It`s short interference tube and consistent off-axis tone also make it well suited for indoor use.

The microphone exhibits a supercardioid polar pattern at low and midrange frequencies, and transitions to a lobar pattern at high frequencies, allowing it to attenuate the 90° off-axis points by about 10 dB from 250 Hz to 2 kHz and by over 14 dB at 4 kHz.

Resists Humidity and Temperature Changes

When working outdoors in humid environments, moisture and condensation can cause many mics to fail. The CS-M1`s rugged design and purpose-built components provide optimum resistance to humidity and hostile temperature changes, assuring dependable signal quality in a variety of environmental conditions.

Professional Sound Quality

The CS-M1 was built for use by independent videographers and demanding sound recordists alike. Its frequency response incorporates a rise in treble peaking at 9 kHz to increase intelligibility and a natural bass roll-off below 70 Hz to mitigate rumble. Its low self-noise of 16 dBA and ultrahigh sensitivity of -22 dB produce signal purity that`s ready to be mixed.

Phantom Powered

Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the CS-M1 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Mounting on a Boompole or Camera

Since the CS-M1 isn`t bundled with a mic clip or shockmount, consider these separately available options to mount the CS-M1 and prevent the transfer of vibrations to the microphone. The Rycote INV-6 shockmount is perfect for mounting the CS-M1 on a boompole or traditional mic stand, and you can get a 3/8"-16 to shoe adapter to allow attachment to a camera`s shoe. The CS-M1`s body features a matte black finish to prevent distracting visual reflections.

Windscreen Minimizes Wind Noise

The CS-M1 has a urethane windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise indoors and outside, consider the Rycote 7cm Classic-Softie furry windshield (available separately).