Well suited for live sound, home recording, and content creators, the Mackie ProFX10v3+ is a 10-channel professional analog mixer with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetooth, and enhance your sound with upgraded GigFX+ effects on a color LCD screen.
All channels feature 3-band EQ, a level control knob, a pan knob, and FX sends. Channels 1-4 features Onyx microphone preamps with 60 dB of headroom, channel inserts, and a low-cut filter, while channels 1& 2 feature 1-knob compression and Hi-Z inputs for instruments. Edit FX parameters on a full-color screen. The three recording modes (Standard Stereo, Channel 1& 2 Direct, and Loopback) provide a ton of flexibility when live streaming or recording directly to a computer. The ProFX10v3+ includes a USB cable and Waveform OEM recording software.
Renowned Onyx Mic Preamps
- 4 Onyx mic pres with up to 60 dB of gain and ultralow noise performance
The Essential Mixing Tools You Need
- 3-band EQ on all channels
- One-knob compression on channels 1 and 2
- Hi-Z switches allow direct connection of instruments
- 100 Hz low-cut filter and 48V phantom power on all mic channels
- Stereo 3.5mm input on channel 9/10
Series Features
High-resolution GigFX+ effects engine
- Enhance your sound with 12 upgraded FX options
- Edit and save presets on the fly with the color LCD screen
24-Bit / 192 kHz 2-4 USB audio interface
- USB-C connection
Switch between recording modes
- Standard: main mix including GigFX+ effects and tone-shaping EQ
- Loopback: computer audio added to main mix, great for live streaming
- Interface: untouched audio from channels 1 and 2 without effects or EQ
Bidirectional Bluetooth
- Integrate callers from an external device like a smartphone or tablet
- Stream music from your device, directly into the mixer
Effortless latency-free monitoring
- Easily blend between monitoring your computer output and a direct feed from the mixer
Record like a pro
- Waveform OEM software included
Signature rugged design
- Legendary Built-Like-A-Tank design
- Solid steel chassis
- Tough ABS side protection
EAN: 810128260831
Mackie ProFX10 V3+ Specs
Key Specs
| Number of Analog Input Channels | 10 |
| Number of Mic Preamps | 4 |
| Analog Output Channels | 2x Stereo Master Output 1x Stereo Control Room/Monitor Output 1x Mono FX Send Output 1x Stereo Headphone Output |
| EQ | No |
| Built-In Effects | 24x Preset (Factory) |
| USB I/O | 1x USB-B 2.0 (2-Track Record, Audio Streaming, Host Connection) |
| Wireless | Bluetooth *Built-In |
| Max Multitrack Recording | 2 Tracks |
| Rack Mountable | No |
| Number of Mic Preamps | 4 |
| Analog Output Channels | 2x Stereo Master Output 1x Stereo Control Room/Monitor Output 1x Mono FX Send Output 1x Stereo Headphone Output |
| Meters | Main Meter: 2x 12-Segment LED |
| Meter Range | Main Meter: -30 dB to +15 dB Plus Peak/Clip |
| Sidechain Filters | No |
| EQ | No |
| EQ Parameters | Low: ±15 dB at 80 Hz Mid: ±15 dB at 2.5 kHz High: ±15 dB at 12 kHz |
| Filters | High-Pass: 100 Hz, 18 dB/Octave |
| Built-In Effects | 24x Preset (Factory) |
| Bit Depth | 24-Bit |
| Frequency Response | Mic Input to Output: 20 Hz to 30 kHz +0/-1 dB (Unity Gain) |
| Max Input Level | +22 dB |
| Output Level | Main Output: +28 dBu at Max Gain All Other Output: +22 dBu at Max Gain |
| I/O Impedance | Mic Input: 3.3 Kilohms Insert Return: 10 Kilohms Line Input: 20 Kilohms Headphone Output: 25 Ohms Main Output: 120 Ohms (Unbalanced) 240 Ohms (Balanced) |
| Crosstalk | Adjacent Inputs: -90 dB at 1 kHz Input to Output: -80 dB at 1 kHz Fader Off: -75 dB at 1 kHz Muted: -90 dB at 1 kHz |
| CMRR | 70 dB at Max Gain (1 kHz, Mic In to Main Out) |
| EIN | -126 dBu at Max Gain (150-Ohm Input) |
| Noise Floor | All Outputs: -95 dBu (Master Level at -∞, Channel Levels at -∞) -80 dBu (Master Level at Unity, One Channel Level at Unity) |
| THD+N | Mic Input to Main Output: < 0.03% (+4 dBu) |
Connectivity
| Analog Inputs | 2x Combo XLR-1/4" 3-Pin Balanced/Unbalanced Mic/Line/Hi-Z Input 2x XLR 3-Pin Balanced Mic Input 6x 1/4" TRS Balanced/Unbalanced Line Input (2 Stereo Pairs) 4x 1/4" TRS Insert Insert 1x 1/8" / 3.5 mm TRS Unbalanced Stereo Line Input |
| Analog Outputs | 2x XLR 3-Pin Balanced Stereo Main Output (1 Stereo Pair) 2x 1/4" TRS Balanced/Unbalanced Main Output (1 Stereo Pair) 2x 1/4" TRS Balanced/Unbalanced Control Room Output (1 Stereo Pair) 1x 1/4" TRS Balanced/Unbalanced FX Send 1x 1/4" TRS Unbalanced Stereo Headphone Output |
| Phantom Power | +48 V, Selectable On/Off (Applied to All Inputs) |
| Digital I/O | No |
| MIDI I/O | No |
| USB I/O | 1x USB-B 2.0 (2-Track Record, Audio Streaming, Host Connection) |
| USB I/O Capacity | 2x Input / 4x Output |
| Other I/O | 1x 1/4" Footswitch Input |
| Wireless | Bluetooth *Built-In |
| Mobile App Compatible | No |
Recording
| Max Multitrack Recording | 2 Tracks |
Power
| AC Input Power | Universal: 100 to 240 VAC, 50 / 60 Hz |
| Power Supply Output | 12 VDC at 2 A |
Physical
| Rack Mountable | No |
| Dimensions | 3.2 x 10.7 x 11.9" / 8.1 x 27.1 x 30.2 cm |
| Weight | 4.9 lb / 2.2 kg |
Packaging Info
| Package Weight | 6.425 lb |
| Box Dimensions (LxWxH) | 14.9 x 12.9 x 4.2" |
In the Box
- Mackie ProFX10v3+ 10-Channel Analog Mixer with Built-In FX, USB Recording, and Bluetooth
- USB-C Cable
- Power Supply
- Waveform OEM Download
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
