The Mackie ProFX12v3 is a 12-channel mixing console featuring seven Onyx microphone preamps with 60 dB of headroom and a built-in effects engine with 24 built-in FX, making it well suited for live sound, home recording, and content creators. The integrated 2x4 USB audio interface offers high-quality 24-bit / 192 kHz recording and playback with zero-latency monitoring.
Channels 1-2 offer combo XLR-1/4" mic/line connections and a Hi-Z switch (for guitar and bass), while channels 3-4 offer XLR or 1/4" inputs. Channels 1-4 include inserts, and single-knob compression. Channels 5/6, 7/8, 9/10 offer two 1/4" inputs, while channel 11/12 uses a 3.5mm stereo input. Channels 1-10 feature gain controls, a 3-band EQ, an aux (monitor) send, a dedicated FX send, pan, mute, and level faders. Engaging channel 11/12 s USB 3-4 switch will override the 3.5mm input and enable the USB return from a computer.
Each channel strip includes button selectors for Main L/R, Sub 1/2, and Solo (PFL). The master section offers dedicated faders for Main, Sub, and FX. Main output connectors include both XLR and 1/4" , while sub and control room outputs use 1/4" connector. A dedicated 1/4" TRS headphone output includes its own independent level control. Other features include an input / USB 1-2 blend control, a dedicated FX output, an FX level fader, and an FX mute, which can also be controlled via the 1/4" footswitch input.
Features
- Professional Sound Quality
- Equipped with 7 Onyx Mic Pres offering up to 60 dB of gain and ultralow noise performance
- GigFX Effects Engine with 24 different FX options, from reverbs to delays and more
- Essential Mixing Tools
- 3-band EQ on all channels
- Channels 5 to 10 feature mic inputs and stereo line inputs for maximum versatility
- Hi-Z switches allows direct connection of guitars, basses, and other instruments
- 100 Hz low-cut filter and 48V phantom power on all mic channels
- Stereo 3.5mm input on channel 11/12
- Aux/Monitor output with dedicated per-channel send control
- Stereo Subgroup output bus with per-channel assignment
- Headphone output with separate level and blend control
- Insert jack on channels 14
- Pre-Fader solo on all channels
- Footswitch input for FX Mute
- Single-knob compression helps keep your input levels in check
- 24-Bit / 192 kHz 2x4 USB Recording Interface
- 2x4 USB I/O allows you to create two custom mixes on your computer to send back in to the mixer
- Perfect for live performance recording, music playback, live streaming, and more
- Latency-Free Monitoring
- Easily blend between monitoring your computers output and a direct feed from the mixer
- Professional Production Content
- Pro Tools | First and Waveform OEM professional software and plugin packages included
- The DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and Limiter
- Signature Rugged Design
- Mackie built-like-a-tank design
- Solid steel chassis protects your investment
- Tough ABS side protection
EAN: 663961057904
Mackie PROFX12V3 Specs
Mixer
| Number of Analog Input Channels | 12 |
| Number of Mic Preamps | 7 |
| Analog Output Channels | 2 x Stereo Master Output 1 x Stereo Control Room/Monitor Output 1 x Stereo Bus/Subgroup Output 1 x Mono Aux Send Output 1 x Mono FX Send Output 1 x Stereo Headphone Output |
| Mix Routing | Stereo Main Mix Stereo Aux Bus/Subgroup |
| Faders | None |
| Meters | Main Meter: 2 x 12-Segment LED |
| Meter Range | Main Meter: -30 dB to +15 dB Plus Peak/Clip |
Signal Processing
| Gain/Trim Range | -20 dB to +60 dB |
| EQ | 3-Band EQ |
| EQ Parameters | Low: ±15 dB at 80 Hz Mid: ±15 dB at 2.5 kHz High: ±15 dB at 12 kHz |
| Filters | High-Pass: 100 Hz, 18 dB/Octave |
| Built-In Effects | 24 x Effect (Type Unspecified) |
Digital Audio
| Bit Depth | 24-Bit |
Performance
| Frequency Response | Mic Input to Output: 20 Hz to 30 kHz +0/-1 dB (Unity Gain) |
| Max Input Level | +22 dB |
| Output Level | Main Output: +28 dBu at Max Gain All Other Output: +22 dBu at Max Gain |
| I/O Impedance | Mic Input: 3.3 Kilohms Insert Return: 10 Kilohms Line Input: ‰¥ 20 Kilohms Headphone Output: 25 Ohms Main Output: 120 Ohms (Unbalanced) 240 Ohms (Balanced) |
| Crosstalk | Adjacent Inputs: -90 dB at 1 kHz Input to Output: -80 dB at 1 kHz Fader Off: -75 dB at 1 kHz Muted: -90 dB at 1 kHz |
| CMRR | 70 dB at Max Gain (1 kHz, Mic In to Main Out) |
| EIN | -126 dBu at Max Gain (150-Ohm Input) |
| Noise Floor | All Outputs: -95 dBu (Master Level at -₧, Channel Levels at -₧) -80 dBu (Master Level at Unity, One Channel Level at Unity) |
| THD+N | Mic Input to Main Output: < 0.03% (+4 dBu) |
Connectivity
| Analog Inputs | 2 x Combo XLR-1/4" 3-Pin Balanced/Unbalanced Mic/Line/Hi-Z Input 5 x XLR 3-Pin Balanced Mic Input 5 x 1/4" TRS Balanced/Unbalanced Line Input (5 Stereo Pairs) 1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Line Input (1 Stereo Pair) 1 x 1/4" TRS Footswitch Input |
| Analog Outputs | 2 x XLR 3-Pin Balanced Stereo Main Output 2 x 1/4" TRS Balanced Stereo Main Output 2 x 1/4" TRS Balanced Stereo Control Room/Monitor Output (1 Stereo Pair) 2 x 1/4" TRS Balanced Stereo Subgroup Output (1 Stereo Pair) 2 x 1/4" TRS Balanced/Unbalanced Aux/Monitor Send 1 x 1/4" TRS Unbalanced Stereo Headphone Output |
| Phantom Power | +48 V, Selectable On/Off (Applied to All Inputs) |
| Digital I/O | None |
| MIDI I/O | None |
| USB | 1 x USB-B 2.0() |
| USB I/O Capacity | 2 x Input / 4 x Output |
| Bluetooth | None |
Compatibility
| OS Compatibility | macOS Windows *As of March, 2022: Check with manufacturer for the most up-to-date compatibility |
Power
| AC Input Power | Universal: 100 to 240 VAC, 50 / 60 Hz |
| AC Power I/O | 1 x IEC Input |
| Power Consumption | 30 W |
Physical
| Rack Mountable | No |
| Dimensions | 3.9 x 13 x 14.8" / 8.1 x 33 x 37.5 cm |
| Weight | 7.9 lb / 3.6 kg |
Packaging Info
| Package Weight | 11.3 lb |
| Box Dimensions (LxWxH) | 18.6 x 15.11 x 5.1" |
In the Box
- Mackie ProFX12v3 12-Channel Sound Reinforcement Mixer with Built-In FX
- USB Cable
- Power Cord
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
