Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
RDL RU-MX4 4-Channel Mic/Line Mixer
EAN: 813721013064
The RDL RU-MX4 is a four-channel audio mixer with XLR mic inputs and RCAline inputs. It provides 24V phantom power on a per-channel basis for microphones that require it. Also on hand is a switchable compressor/limiter to keep levels from peaking, if need be. This mixer is useful for combining balanced mic and/or unbalanced line inputs into a single output. The RU-MX4 is suitable for small sound reinforcement, public address systems, or mixer expansion applications.
You ll note that for outputs, you have the options of an unbalanced RCAand a balanced XLR out. The XLR output itself is switchable between mic or line level. While you can only use one input configuration at a time (either XLR or RCA), you can use both outputs simultaneously.
Levels can be adjusted on the front panel, which leaves you enough space to label each input. Each input sports a dual-LED VU meter following standard VU ballistics, with green indicating signal and red to indicate when you go over the correct operating level. The output is displayed on an LED string VU meter. Please note, you must purchase the corresponding PS-24AS power supply separately.
Four Mic/Line Input Channels
Each channel features a balanced XLR mic input and an unbalanced RCAline input. An additional RCAdirect input accepts input from another RU-MX4.
Flexible Output Section
The outputs consist of a mic/line selectable XLR channel along with an unbalanced RCAoutput that may be used for linking multiple mixers.
Phantom Power
A 24V phantom power switch is located below each microphone input. These switches activate the phantom voltage and set the input preamp for the optimum gain range for the type of microphone. An integral high-pass filter rolls off frequencies below 80 Hz.
EAN: 813721013064
The RDL RU-MX4 is a four-channel audio mixer with XLR mic inputs and RCAline inputs. It provides 24V phantom power on a per-channel basis for microphones that require it. Also on hand is a switchable compressor/limiter to keep levels from peaking, if need be. This mixer is useful for combining balanced mic and/or unbalanced line inputs into a single output. The RU-MX4 is suitable for small sound reinforcement, public address systems, or mixer expansion applications.
You ll note that for outputs, you have the options of an unbalanced RCAand a balanced XLR out. The XLR output itself is switchable between mic or line level. While you can only use one input configuration at a time (either XLR or RCA), you can use both outputs simultaneously.
Levels can be adjusted on the front panel, which leaves you enough space to label each input. Each input sports a dual-LED VU meter following standard VU ballistics, with green indicating signal and red to indicate when you go over the correct operating level. The output is displayed on an LED string VU meter. Please note, you must purchase the corresponding PS-24AS power supply separately.
Four Mic/Line Input Channels
Each channel features a balanced XLR mic input and an unbalanced RCAline input. An additional RCAdirect input accepts input from another RU-MX4.
Flexible Output Section
The outputs consist of a mic/line selectable XLR channel along with an unbalanced RCAoutput that may be used for linking multiple mixers.
Phantom Power
A 24V phantom power switch is located below each microphone input. These switches activate the phantom voltage and set the input preamp for the optimum gain range for the type of microphone. An integral high-pass filter rolls off frequencies below 80 Hz.
RDL RU-MX4 Specs
Mixer
| Number of Analog Input Channels | 4 |
| Number of Mic Preamps | 4 |
| Analog Output Channels | 2 x Mono Master Output |
| Meters | Channel Meter: 4 x 2-Segment LED Main Meter: 8-Segment LED |
| Meter Range | -20 dB to +12 dB Peak/Clip |
| Meter Calibration | 0 VU on Meter = +4 dBu at Main Output |
Signal Processing
| Gain/Trim Range | Mic Input: -₧ to 62 dB Line Input: -₧ to 27 dB |
| Built-In Effects | None |
Performance
| Frequency Response | Mic Input: 80 Hz to 30 kHz ±1.5 dB Line Input: 20 Hz to 30 kHz ±0.25 dB |
| Output Level | +4 dBu (Balanced) -10 dBV (Unbalanced) -45 dBu (Mic Level) |
| I/O Impedance | Input: 2 Kilohms (Balanced) 2 Kilohms (Unbalanced) Output: 150 Ohms (Balanced) |
| Noise Floor | < -84 dB (at Unity Gain, 4 Line-Level Sources) |
| THD | Mic Input: < 0.1% Line Input: < 0.02% |
| THD+N | Mic Input: < 0.1% Line Input: < 0.02% |
Connectivity
| Analog Inputs | 4 x XLR 3-Pin Balanced Input 5 x RCA Unbalanced Input |
| Analog Outputs | 1 x RCA Unbalanced Output 1 x XLR 3-Pin Balanced Output |
| Phantom Power | +24 V (Selectable on Individual Inputs) |
Power
| Power Supply Output | 24 VDC at 150 mA, Center-Positive (Not Included) |
Physical
| Rack Mountable | No |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Dimensions | 1.7 x 5.8 x 4.8" / 4.3 x 15 x 12.2 cm |
| Weight | 1.6 lb / 0.7 kg |
Packaging Info
| Package Weight | 1.7 lb |
| Box Dimensions (LxWxH) | 6.75 x 6.3 x 2.5" |
In the Box
- RDL RU-MX4 4-Channel Mic/Line Mixer
- Power Interconnect Cable for Additional Units
- 3-Year Manufacturer Warranty
No posts found
