EAN: 675889008203
When you need a space-saving solution for mixing multiple mic/line signals in conference rooms, houses of worship, or small-scale concert venues, consider the 1 RU rack-mountable Rolls RM82 eight-channel mixer. It features eight balanced 3-pin XLR microphone inputs with individually selectable 48 VDC phantom power to accommodate dynamic or condenser microphones. Plus, its eight unbalanced 1/4 TS inputs offer easy connectivity for line-level inputs or may be configured to function as inserts (for external processing) or direct outputs (for routing to a multitrack recorder). Amono RCAauxilliary input accepts an additional line input.
Adjustable trim, level knobs, and treble/bass cut circuits on each channel allow simple and efficient mixing control from the front panel. The summed mono output is fed through a master level control to a rear-panel XLR male connector. Plug the RCAoutput into an audio recorder to preserve a dedicated mix signal that is independent of the master level.
Eight balanced microphone inputs via 3-pin XLR female sockets
Eight unbalanced line inputs via 1/4 TS jacks
Each line input can be internally jumpered to function as a channel insert or direct output
Per-channel tone control cuts up to 12 dB of treble (above 6 kHz) or bass (below 200 Hz)
Adjustable trim and level on each channel
Line-level XLR main output can be switched internally to output mic-level signal
Ninth unbalanced input via mono RCAaux input jack
RCApre-fader output is independent of the master level control
Connect the RCApre-fader output to the RCAaux input of a second RM82 (available separately) to enable master level control of both devices from the first RM82
Dedicated power switch and LED power indicator
Rack-mountable enclosure occupies just 1 RU of rack space
Rolls RM82 Specs
Mixer
| Number of Analog Input Channels | 8 |
| Number of Mic Preamps | 8 |
| Analog Output Channels | 1 x Mono Master Output |
| Meters | None |
Signal Processing
| Gain/Trim Range | Mic Input: Up to 55 dB Line Input: Up to 26 dB |
| EQ | Input Channels: 2-Band Tone Cut |
| EQ Parameters | High: -12 dB at 6 kHz (Tone Cut) Low: -12 dB at 200 Hz (Tone Cut) |
| Solo/Mute | None |
| Built-In Effects | None |
Performance
| Max Input Level | Mic Input: 0 dBV Line: +6 dBV |
| Output Level | +22 dBV at Max Gain |
| I/O Impedance | Output: 51 Ohms XLR Input: 10 Kilohms 1/4" Input: 20 Kilohms RCA Input: 10 Kilohms |
| CMRR | > 80 dB |
| SNR | 106 dB |
| THD | < 0.009% |
Connectivity
| Analog Inputs | 1 x RCA Coaxial Aux Input 8 x XLR 3-Pin Balanced Input 8 x 1/4" TS Unbalanced Input |
| Analog Outputs | 1 x RCA Coaxial Aux Output 1 x XLR 3-Pin Monitor Output |
| Phantom Power | +48 V (Selectable on Individual Inputs) |
Power
| AC Input Power | 240 VAC, 50 / 60 Hz |
| Power Consumption | 15 VA |
Physical
| Rack Mountable | Yes |
| Dimensions | 19 x 1.8 x 6" / 48 x 4.5 x 15 cm |
| Weight | 7 lb / 3.2 kg |
Packaging Info
| Package Weight | 5.65 lb |
| Box Dimensions (LxWxH) | 21.654 x 8.189 x 3.858" |
In the Box
- Rolls RM82 8-Channel Mic/Line Mixer
- 2-Year Manufacturer Warranty
No posts found
