EAN: 688705210902
The Soundcraft FX16ii is a 16-channel mixer offering powerful mixing features and flexible routing for a variety of recording, sound reinforcement, and monitor mixing applications. Each of the 16 input channels can be fed via a 3-pin XLR mic input or 1/4 TRS line input, and features a 1/4 insert jack for connection of analog outboard gear. The mic preamps provide 48 VDC phantom power and up to 60 dB of gain. Tonally sculpt your sources via 3-band EQ and high-pass filtering on every channel, and easily add reverb, delay, or modulation with the integrated 24-bit Lexicon effects processor, which boasts 32 presets, three dedicated parameter knobs, and a tap tempo function.
All channels have three independent mono aux sends, making the FX16ii well suited to monitor mixing and hookup of external effects processors. The 16 direct outputs are ideal for pre- or post-fader signal routing to a multitrack recorder or an additional mixer, while subgroup and mix outputs with inserts enable versatile bus structuring. In addition to the XLR stereo mix outputs, 1/4 mono mix output, and 1/4 subgroup outputs, the FX16ii has 1/4 monitor outs and a top-panel headphone jack. Thanks to a rotatable connector pod, this mixer supports desktop or rackmount configurations (rack rails available separately).
16 Input Channels
16 input channels with XLR mic inputs, 1/4 line inputs, and 1/4 insert points
Direct Outputs
Per-channel direct output allows pre- or post-fader signal routing to a multitrack recorder or an additional mixer
Lexicon Effects Processor
Integrated 24-bit Lexicon effects processor engine uses the same AudioDNA processor featured in many Digitech and Lexicon outboard equipment including the highly respected Lexicon MX400 processor
Two Subgroup Outputs
Two subgroup outputs provide alternative routing from the main output
Aux Sends and Returns
Three mono aux sends and four stereo aux returns for connection of outboard effects processors
Split Phantom Power Control
Two phantom power switches for separate application of +48 VDC for each bank (channels 1-8 and channels 9-16)
Rotating Connector Pod
A rotatable connector pod makes desk- or rack-mounting quick and easy (rack rails available separately)
Additional Features
- 4-bus architecture with subgroup routable to the main mix
- Built-in effects processing with 32 FX settings, three dedicated parameter knobs, tap tempo, and user FX settings
- Inserts on all mono channels, subgroups, and mix output
- Classic Soundcraft 3-band EQ with swept midrange band
- Selectable 100 Hz, 18 dB/octave high-pass filter per channel
- Long-throw 100mm faders
- Mute and solo per channel
- 10-segment, tricolor metering
- Stereo and mono mix outputs
- Integral universal power supply
Soundcraft FX16ii Specs
Mixer
| Number of Analog Input Channels | 16 |
| Number of Mic Preamps | 16 |
| Analog Output Channels | 1 x Stereo Master Output 1 x Mono Master Output 1 x Stereo Control Room/Monitor Output 1 x Stereo Bus/Subgroup Output 3 x Mono Aux Send Output 16 x Mono Direct Output 1 x Stereo Headphone Output |
| Faders & Level Adjustment | 3.9" / 100 mm Channel Fader |
| Meters | 2 x 10-Segment LED |
Signal Processing
| Gain/Trim Range | 0 dB to 60 dB |
| EQ Parameters | High: ±15 dB at 12 kHz Mid: ±15 dB at 150 Hz to 3.5 kHz, 1.5 Q Low: ±15 dB at 80 Hz |
| Filters | High-Pass: 100 Hz, 18 dB/Octave |
| Solo/Mute | Mute, PFL, Solo-in-Place/AFL per Input Channel Solo-in-Place/AFL per Bus |
| Built-In Effects | Yes |
| DSP | 24-Bit |
Performance
| Frequency Response | Mic/Line Input to Output: 20 Hz to 20 kHz ±1 dB |
| Max Input Level | Mic Input: +15 dBu Line Input: +30 dBu (Mono) +30 dBu (Stereo) |
| Output Level | Main Output: +20 dBu |
| Headphone Output Power | 300 mW into 150 Ohms |
| I/O Impedance | Mic Input: 2 Kilohms Line Input: 10 Kilohms Stereo Input: 65 Kilohms (Stereo) 35 Kilohms (Mono) Output: 150 Ohms (Balanced) 75 Ohms (Unbalanced) |
| Crosstalk | Adjacent Channels, Muted: > 96 dB |
| EIN | Mic Input: -127 dBu (150-Ohm Source, Max Gain) |
| Noise Floor | < -84 dBu (Master Level at Unity, Channel Level at -+?) |
| THD | < 0.09% (+14 dBu, 1 kHz) |
Connectivity
| Analog Inputs | 1 x 1/4" TS Footswitch Input 1 x Stereo RCA Coaxial Unbalanced 2-Track Return 16 x 1/4" TRS Unbalanced Channel Insert 2 x 1/4" TRS Unbalanced Sub Insert 2 x 1/4" TRS Unbalanced Mix Insert 16 x XLR 3-Pin Balanced Mic Input 16 x 1/4" TRS Balanced Line Input 8 x 1/4" TRS Balanced Aux Return (4 Stereo Pairs) |
| Analog Outputs | 16 x 1/4" TRS Balanced Direct Output 2 x 1/4" TRS Balanced Monitor Output (1 Stereo Pair) 1 x 1/4" TRS Headphone Output 2 x 1/4" TRS Balanced Subgroup Output (1 Stereo Pair) 2 x XLR 3-Pin Balanced Main Output 1 x 1/4" TRS Balanced Main Output 3 x 1/4" TRS Balanced Aux Send |
| Phantom Power | +48 V, Selectable On/Off (on 8 Channels) |
Power
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | 40 W |
Physical
| Rack Mountable | No |
| Operating Temperature | 41 to 104°F / 5 to 40°C |
| Dimensions | 17.5 x 6.2 x 17.4" / 44.3 x 15.7 x 44.2 cm (Excluding Rack Rails, Including Feet) |
Packaging Info
| Package Weight | 26.32 lb |
| Box Dimensions (LxWxH) | 22.6 x 21.1 x 10.5" |
In the Box
- Soundcraft FX16ii 16-Channel Mixer with Built-In Lexicon Effects Processor
- Power Cable
- 2 Year Manufacturer Warranty
No posts found
