Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Toa Electronics D-2008SP 32-Channel Digital Mixing Processor Unit
The D-2008SP Digital Mixing Processor Unit from Toa Electronics features up to 32 audio inputs and outputs in total, and can be mounted in an ElA standard equipment rack (3U size). A built-in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control parts can accept optional plug-in modules, allowing the unit to have a maximum of 32 inputs or 32 outputs and up to 2 control modules (available separately). The optional plug-in modules enable the unit to perform their functions for example, two D-983 remote control modules can be used to provide a maximum of 48 contact inputs and 32 contact outputs. Similarly, the D-984VC module can be added for VCA control and the D-2000CB CobraNet interface module can be used for audio data transfer between multiple processor units. Each function can be set by the dedicated setting software on a PC. These settings can be stored in the unit s internal memory as presets, which can be recalled by the unit without using a PC.
The D-2008SP Digital Mixing Processor Unit from Toa Electronics features up to 32 audio inputs and outputs in total, and can be mounted in an ElA standard equipment rack (3U size). A built-in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control parts can accept optional plug-in modules, allowing the unit to have a maximum of 32 inputs or 32 outputs and up to 2 control modules (available separately). The optional plug-in modules enable the unit to perform their functions for example, two D-983 remote control modules can be used to provide a maximum of 48 contact inputs and 32 contact outputs. Similarly, the D-984VC module can be added for VCA control and the D-2000CB CobraNet interface module can be used for audio data transfer between multiple processor units. Each function can be set by the dedicated setting software on a PC. These settings can be stored in the unit s internal memory as presets, which can be recalled by the unit without using a PC.
Toa Electronics D-2008SP CU Specs
| Frequency Response | 20 Hz to 20 kHz, ±1 dB (+4 dB input) |
| Sampling Frequency | 48 kHz |
| Input | Maximum 32 channels Modular construction (modules available separately) |
| Output | Maximum 32 channels Modular construction (modules available separately) |
| Headphone | 1 x stereo |
| Equalizer | Parametric: 20 Hz to 20 kHz, i15 dB, Q: 0.267 to 69.249 Horn: 20 kHz, 0 to +18 dB (0.5 dB steps) |
| Filter | Filter High-Pass: 20 Hz to 20 kHz (6 or 12 dB/oct) Low-Pass: 20 Hz to 20 kHz (6 or 12 dB/oct) Crossover: 20 Hz to 20 kHz (6, 12, 18, or 24 dB/oct) Notch: 20 Hz to 20 kHz, Q: 8.651 to 69.249 All-Pass: 20 Hz to 20 kHz, Q: 0.267 to 69.249 High Shelving: 6 to 20 kHz, ±15 dB Low Shelving: 20 to 500 Hz, ±15 dB |
| Compressor / Limiter | Compressor Mode: Threshold: -20 to +20 dB (1 dB steps) Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 5:1, 7:1, 8:1, 10:1, 12:1, 20:1, ₧:1 Attack Time: 0.2 ms to 5 sec Release Time: 10 ms to 5 sec Gain: ₧ to +10 dB Knee Type: hard knee, soft knee 1, soft knee 2 Auto-Leveler Mode: Target Level: -20 to +10 dB (1 dB steps) Maximum Gain: 0 to +20 dB (1 dB steps) Attack Time: 10 ms to 10 sec Release Time: 100 ms to 10 sec |
| Delay Time | Output: 0 to 1360 ms (0.021 ms steps) Bus: 0 to 677 ms (0.021 ms steps) |
| Matrix | Input: Maximum 32 channels x 24 buses Output: Maximum 44 (24 + 4 + 16) buses x 32 channels CobraNet Interface with Optional Module: Output: Maximum 16 channels x 24 buses Output: Maximum 28 (24 + 4) buses x 16 channels |
| Gain | Crosspoint Gain: -₧ to 0 dB (1 dB steps) |
| Preset Memory | 32 |
| Auxiliary | Key locking function |
| Network Interface | 10BASE-T/100BASE-TX (automatic-negotiation), Connected via a switching hub |
| Network Protocol | TCP/lP |
| Connection Cable | CAT5-STP or higher twisted pair LAN cable Maximum Cable Distance: 328` / 100 m, between D-2008SP unit and switching hub |
| Control | RS-232C: 9-pin D-sub connector, used for control Module: 2 remote control module slots |
| Operating Temperature | 41 to 104°F / 5 to 40°C |
| Material | Panel: Aluminum, hair-line finish Case: Surface-treated steel plate |
| PC Requirements | CPU: Intel Premium4 2 GHz or higher RAM: 1.5 GB or more (2 GB is more recommended) Display: 1024 x 768 resolution or higher Free Hard Disk Space: 16 MB or more (For D-2000 setting software installation) 500 MB or more (when ".NET Framework" needs to be installed) LAN Card: Compatible to 10BASE-T or faster connection Operating System: Windows XP SP2 or later Windows Vista (32/64-bit edition) Windows 7 (32/64-bit edition) Required Component: .NET Framework Version 3.5 SP1 |
| Power Source | 120 VAC, 60 Hz |
| Power Consumption | 78 W |
| Dimensions | 19 x 5.2 x 13.5" / 48.2 x 13.3 x 34.3 cm |
| Weight | 13.9 lb / 6.3 kg |
In the Box
- Toa Electronics D-2008SP 32-Channel Digital Mixing Processor Unit
- Software CD
- 6.5` Power Cord
- 4 x Module Mounting Screws
- 8 x Blank Panels (Pre-installed on the Module Slot)
- 5-Year Manufacturer Warranty
No posts found
