Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
The Allen & Heath DX164-W 16-In / 4-Out 96 kHz Expander is a wall- or floor-mountable expander that adds remote I/Os to a dLive, Avantis, or SQ mixer or to an AHM audio matrix processor. It provides 16 balanced XLR mic-/line-level inputs with individually configured Phantom Power, and 4 balanced XLR line outputs. No configuration is required, just connect to your mixer and you're ready to go. Firmware updates are handled automatically by the mixer.
Allen & Heath DX164-W Specs
General
Compatibility | Allen & Heath AHM / dLive / SQ |
Inputs | Mic/Line Inputs: 16 x Balanced XLR, +48 V Phantom Power Mic/Line Preamp: Fully Recallable Input Sensitivity: -60 to +15 dBu Analog Gain: +5 to +60 dB, 1 dB steps Pad: -20 dB Active PAD Maximum Input Level: +30 dBu (PAD In) Input Impedance: >4 Kilohms (Pad Out), >10 Kilohms (Pad In) Mic EIN: -127 dB with 150 Ohms Source |
Outputs | Analogue Outputs: 4 x XLR Balanced, Relay-Protected Output Impedance: <75 Ohms Nominal Output: +4 dBu = 0 dB Meter Reading Maximum Output Level: +22 dBu Residual Output Noise: -92 dBu (Muted, 20 Hz to 20kHz) / -90 dBu (Muted, 20 Hz to 40kHz) |
Power | Mains Voltage Operating Range: 100 to 240 VAC, 50/60Hz Mains Power Consumption: 35 W max DC Input: 12 VDC, 3 A max |
Inputs / Outputs
Connector 1 | 16x XLR Female |
Connector 2 | 4x XLR Male |
Environmental
Operating Temperature | 32 to 95°F / 0 to 35°C |
Physical
Color | Black |
Cable Length | Not Specified by Manufacturer |
Dimensions | 8.3 x 8.3 x 3.4" / 210 x 210 x 87 mm |
Weight | 7.1 lb / 3.2 kg |
In the Box
- Allen & Heath DX164-W 16-In / 4-Out 96 kHz Expander
- 3-Year Manufacturer Warranty
No posts found