The AA200PHD 6-Input 200W Mixer Amplifier from Atlas Sound is a 6-input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, medium-to-large speech privacy systems, and in applications where music on hold (MOH) and paging is required. With four microphone/line input and two stereo line inputs, the AA200PHD Amp can accommodate a variety of input sources including paging microphones, media players, and digital music receivers. The AA200PHD operates on 110-220 VAC for the US market.
The AA200PHD Amp includes an automatic system test, the Push Here Diagnostic (PHD). The PHD button is designed to check the connected speaker lines for wiring and impedance errors. This test can be activated once all speakers are connected and the circuit automatically verifies that the attached speakers tap settings do not exceed the amplifier s rated power, no speakers are mistakenly tapped at 8 ohms, and the speaker wire is free from shorts.
The amp also incorporates a Remote Input Selection and Remote Level Control feature that allows the integrator to use the WPD-RISRL remote wall plate (not included), which lets the user select the input and adjust the volume from that wall plate up to 200 from the amplifier.
The AA200PHD Amp provides 200W output power into 25/70.7V, or 4-ohm speaker systems. A rear-panel DIP switch allows for creation of Zone 2 output mix using any or all of inputs 1-4. Unit can also be set up to mute Inputs 2 through 6 on signal from Input 1 for paging applications where other input sources need to be muted during a page. Inputs 1 to 4 are either Mic or Line input selectable and phantom power is an option when using them as a microphone input.
Key Features
Voltage compatibility: 110-220 VAC
200W into 25/70.7V and 4-ohm loads
Automated diagnostic system test (Push Here Diagnostic)
Four balanced Mic/Line/Tel inputs with phantom power
Three unbalanced, summing line-level inputs
Input assignable zone 2 output
Remote Level Control
Remote Input Select (RIS)
Line output
Preamp In for external processors
Variable mute sensitivity control for Input 1
Contact closure mute terminals
Rear-mounted DIP switch allows mute receive for inputs 2 through 6
EAN: 612079190867
Atlas Sound AA200PHD Specs
Amplifier
| Form Factor/Type | Tabletop |
| Number of Channels | 6 Input |
| Power Rating | 200 W |
| Load Impedance / Voltage | 4 Ohms 25 / 70 V |
Performance
| Frequency Response | 50 Hz to 15 kHz ±3 dB |
| Input Sensitivity | Mic: 5 mV Line: 316 mV / -10 dBV |
| I/O Impedance | RCA Amplifier Input: 600 Ohms RCA Preamp Output: 150 Ohms (Unbalanced) Zone Output: 600 Ohms (Unbalanced) Line/Mic Input: 1200 Ohms Aux Input: 10 Kilohms RCA Input: 10 Kilohms (Unbalanced) |
| Output Level | Zone Output: 1 V Max |
| VCA Control | None |
| SNR | Mic: > 55 dB Line: > 55 dB Telephone: > 55 dB Aux: > 75 dB |
| THD+N | < 0.5% (1 kHz, at Rated Power) |
Signal Processing
| EQ | Treble: ±6 dB at 10 kHz Bass: ±6 dB at 100 Hz |
| Limiting | None |
Connectivity
| Audio I/O | 4 x Block 3-Pin Balanced Line/Mic Input 1 x Stereo RCA Unbalanced Aux Input 1 x 1/8" / 3.5 mm Unbalanced Aux Input 1 x RCA Unbalanced Amplifier Input 1 x RCA Unbalanced Preamp Output |
| Digital Audio I/O | None |
| Network I/O | None |
| Other I/O | 1 x Block 2-Pin Mute 2 x Block 4-Pin Remote |
| Speaker Outputs | Block 4-Pin Balanced (Detachable, Transformer-Coupled) |
| Number of Module Slots | None |
| USB | None |
| Phantom Power | 24 VDC |
| Bluetooth | None |
| Media/Memory Card Slot | None |
Power
| AC Input Power | 110 to 220 VAC, 60 Hz |
| AC Power Connector | 1 x Hardwired Cord / NEMA 5-20 |
| Current Consumption | 0.18 A (Idle) 2.9 A (Typical) 4.5 A (Max) |
| Power Consumption | 21 W (Idle) 348 W (Typical) 540 W (Max) |
| AC Outlet | None |
Physical
| Certifications | RoHS, ETL *as per Manufacturer |
| Dimensions | 17.0 x 3.7 x 15.0" / 42.0 x 9.3 x 42.0 cm |
| Weight | 26 lb / 12 kg |
Packaging Info
| Package Weight | 28 lb |
| Box Dimensions (LxWxH) | 19.8 x 17.2 x 7.3" |
In the Box
- Atlas Sound AA200PHD 6-Input 200W Mixer Amplifier with PHD Automatic System Test (US: 110-120 VAC)
- 3-Year Manufacturer Warranty
No posts found
