The Prism Sound ADA-8XR Audio Interface with 16-Channel D/A & FireWire is a 24-bit / 192 kHz modular audio interface offering flexible inputs and outputs, versatile clocking, and configurable routing for demanding music and film production scenarios. It includes two I/O modules, a FireWire interface card, a utility module for 16 balanced analog line-level outputs via XLR 3-pin jacks, eight channels of digital I/O via two FireWire 400 ports, a 1/4" stereo headphone output, and more. With wide dynamic range, adjustable levels, and low distortion and noise, it delivers high-quality audio performance that is easily customized using the onboard display and comprehensive controls.
Prism Sound ADA-8XR Frame Audio Interface Chassis (No I/O Modules)
The Prism Sound ADA-8XR Frame is a rack-mountable 2 RU audio interface chassis designed to deliver versatile clocking and configurability for producers, musicians, and audio engineers in home, project, and commercial studios. Its modular design yields flexible I/O arrangements thanks to four I/O module slotstwo analog and two digital. A variety of modules (available separately) can be installed for access to multichannel analog/digital inputs and outputs as well as Pro Tools or FireWire workstation connectivity.
The ADA-8XR Frame supports resolutions up to 24-bit/192 kHz, and can clock internally or to external AES3, AES11, word clock, or Pro Tools Loop Sync. The built-in Utility Module provides stereo analog RCA and digital BNC audio outputs, BNC word clock and XLR AES11 sync I/O, and a DB9 serial communications port. Additionally, the front panel has a 1/4" stereo headphone output along with assignable 8-channel bargraph meters. An onboard display and comprehensive controls enable efficient adjustment of parameters, which can be quickly stored and recalled via factory and user presets. The ADA-8XR Frame comes with no I/O modules, ready for custom configurations.
Modular architecture accommodates special configurations and provides future-proofing with individually upgradeable A/D conversion, D/A conversion, DSP, digital interfacing, and utility hardware
Supports sample rates up to 192 kHz
2-channel monitor section follows channel pairs or a mix of all channels
8-channel assignable bargraph meter array with over-detection
Renowned Prism Sound jitter-rejecting PLL technology and low-jitter master clock
Flexible synchronization options including sync to AES11, word clock, or video sync
Flexible routing allows creation of digital-to-digital processing paths for processing or format conversion
SNS noise-shapers preserves dynamic quality during 16-/20-bit transfers
MR-X bit-splitting allows extended bit depths and sample rates on 16-bit media
DRE (Dynamic Range Enhancement) enables 24-bit performance on 16-bit stereo media without sacrificing tracks
Optional DSP expansion facility for extended processing features including synchronous sample-rate conversion
Comprehensive store system for fast-access factory and user presets
Unique "Access button" layout combines the flexibility of menus with the speed of dedicated controls
Internet-upgradeable software loads from your computer into flash memory inside the ADA-8XR
Rack-mountable enclosure occupies 2 RU of rack space
Prism Sound 8C-DA 8-Channel D/A Module for ADA-8XR Interface
The Prism Sound 8C-DA is an 8-channel D/A module offering uncompromising digital-to-analog conversion for producers, musicians, and audio engineers using a Prism Sound Dream ADA-8XR audio interface in a variety of studio environments. Exhibiting low noise, minimal distortion, and high dynamic range, it features 24-bit/192 kHz D/A converters, which feed analog line level to eight balanced XLR 3-pin male outputs.
For precise calibration and gain optimization, each channel offers output level adjustments in 0.5 dBu increments and output trim tweaks in 0.05 dBu steps. The 8C-DA easily installs into an analog I/O slot of a Dream ADA-8XR (available separately).
Adds eight analog line-level outputs to your Prism Sound Dream ADA-8XR audio interface
Supports resolutions up to 24-bit/192 kHz
Output level (0.5 dBu increments) and trim (0.05 dBu increments) are adjustable via the host ADA-8XR`s menu system
Eight balanced XLR 3-pin male input jacks
Prism Sound 8C-FW 8-Channel FireWire I/O Module for ADA-8XR Interface
The Prism Sound 8C-FW is an 8-channel FireWire I/O module offering flexible digital input and output configurations for producers, musicians, and audio engineers using a Prism Sound Dream ADA-8XR audio interface in a variety of studio environments. With selectable configurations, it supports up to eight channels of I/O at up to 96 kHz or up to four channels of I/O at 176.4 kHz or 192 kHz. Two 6-pin FireWire 400 (1394a) ports enable proper connectivity with computers equipped with 4- or 6-pin FireWire 400. The 8C-FW easily installs into the upper or lower digital I/O slot of a Dream ADA-8XR (available separately) and is compatible with Mac OS X and Windows systems.
Eight channels of digital audio I/O at sample rates up to 96 kHz
Four channels of digital audio I/O at 176.4 kHz or 192 kHz
Functions as a Core Audio device under Mac OS X (multiple FireWire modules are not supported by Mac OS X)
Functions as a WDM and ASIO compliant device under Windows XP and later (multiple FireWire modules are supported by Windows)
Compatible with 4- or 6-pin FireWire 400 (1394a) ports
Supports multiple I/O configurations8-in / 8-out, 2-in / 8-out, 8-in / 2-out, or 4-in / 4-out
Easily installs in either digital I/O slot (DIO1 or DIO2) of an ADA-8XR (available separately)
Prism Sound ADA-8XR Frame Audio Interface Chassis (No I/O Modules) Specs
Form Factor | Rackmount |
Channels of I/O | None |
Maximum Sampling Rate | 192 kHz / 24-Bit |
Number of Microphone Preamps | None |
Expansion Slots | 2 x Analog I/O Slot 2 x Digital I/O Slot 1 x Utility Slot 1 x Internal DSP Slot |
Connectivity
Analog Audio I/O | 1 x Stereo RCA Balanced Output 1 x 1/4" TRS Headphone Output |
Digital Audio I/O | 1 x BNC Coaxial AES-3id / S/PDIF Output |
Sync I/O | 1 x BNC Video Sync/Word Clock Input 1 x BNC Word Clock Output 1 x XLR 3-Pin AES11 Input 1 x XLR 3-Pin AES11 Output |
MIDI I/O | None |
Other I/O | 1 x DE-9/DB-9 RS-232/RS-485 In/Out |
Performance
Impedance | RCA Outputs: 50 Ohms 1/4" Outputs: 115 Ohms XLR Outputs: 110 Ohms BNC Sync Outputs: 75 Ohms XLR Mic Inputs: 110 Ohms BNC Sync Inputs: 75 Ohms |
Dynamic Range | RCA Outputs: 105 dB (-60 dBFS, 1 kHz) |
THD+N | RCA Outputs: -101 dB / 0.0009% (1 kHz, at -1 dBFS) |
Channel Separation | RCA Outputs: > 120 dB (1 kHz) |
Digital Audio
dBFS Reference Level | +15 / +18 / +21 / +24 dBu = 0 dBFS (Selectable) |
Sample Rates | Up to 192 kHz |
Bit Depths | Up to 24-Bit |
Clocking | Accuracy: ±25 ppm Jitter Suppression: > 60 dB (above 700 Hz) |
Power
AC Input Power | 90 to 125 VAC, 50 / 60 Hz 180 to 250 VAC, 50 / 60 Hz |
Power Consumption | 60 W |
Physical
Rackmount Size | 2 RU |
Dimensions | 19 x 15.4 x 3.5" / 483 x 390 x 88 mm |
Weight | 16.5 lb / 7.5 kg |
Prism Sound 8C-DA 8-Channel D/A Module for ADA-8XR Interface Specs
Outputs | 8 x XLR 3-pin male (balanced) |
Output Impedance | 50 Ohms |
Input Range | +5 to +24 dBu in 1 dBu steps, trims in 0.05 dBu steps |
Gain Accuracy | ±0.05 dB |
Balance | Output Balance: 54 dB |
THD + N | -102 dB (0.0007%) at 997 Hz, -1 dBFS |
Dynamic Range | 108 dB at 997 Hz, -60 dBFS |
Intermodulation Distortion (SMPTE) | < -94 dB (60 Hz at -3 dBFS, 7 kHz at -12 dBFS) |
Spurious | Maximum Aharmonic Spurium: < -130 dBFS (997 Hz at -1 dBFS) |
Frequency Response | 44.1 kHz: 5 Hz to 20.8 kHz (-0.05 dB), 1.4 Hz to 22 kHz (-3 dB) 48 kHz: 5.1 Hz to 22.6 kHz (-0.05 dB), 1.4 Hz to 23.9 kHz (-3 dB) 96 kHz: 5.1 Hz to 38.9 kHz (-0.05 dB), 1.4 Hz to 47.4 kHz (-3 dB) 192 kHz: 5.2 Hz to 37.2 kHz (-0.05 dB), 1.4 Hz to 74.4 kHz (-3 dB) |
Passband Ripple | <0.005 dB |
Inter-Channel Differential Phase | <0.02° |
Channel Separation | 1 kHz: >115 dB 20 Hz to 20 kHz: >110 dB |
Latency | 44.1 kHz: 49.5 samples / 1.12 ms 48 kHz: 49.5 samples / 1.03 ms 96 kHz: 49.5 samples / 0.52 ms 192 kHz: 49.5 samples / 0.26 ms |
Dimensions | 7.9 x 7.1 x 1.2" / 20 x 18 x 3 cm |
Weight | 0.7 lb / 0.3 kg |
Prism Sound 8C-FW 8-Channel FireWire I/O Module for ADA-8XR Interface Specs
Form Factor | Internal Card |
Channels of I/O | 8 Input / 8 Output at 48/96 kHz 4 Input / 4 Output at 176.4/192 kHz |
Maximum Sampling Rate | 192 kHz / 24-Bit |
Number of Mic Preamps | None |
Connectivity
Analog Audio I/O | None |
Digital Audio I/O | None |
Host Connection Protocol | FireWire 400 |
MIDI I/O | None |
Digital Audio
Sample Rates | Up to 192 kHz |
Compatibility
Processor Requirement | Mac: 700 MHz PowerPC G4 PC: 900 MHz Intel Pentium |
RAM Requirements | 256 MB |
Minimum Display Resolution | 800 x 600 |
Required Hardware | Available FireWire 400 Port |
Physical
Dimensions | 4.3 x 6.7 x 1.6" / 11 x 17 x 4 cm |
Weight | 0.2 lb / 0.1 kg |
In the Box
- Power Cable
- BNC to RCA Connector
- 3-Year Manufacturer Warranty
- 3-Year Manufacturer Warranty
No posts found