Electro-Voice RE20 Dynamic Microphone Broadcaster Kit (Black)

Offering podcasters, show hosts, and broadcasters the impactful sound of FM radio voices along with smooth, professional-looking mic positioning, this Kit features the black Electro-Voice RE20 dynamic broadcast announcer microphone, a suspension shockmount, a foam windscreen, and a two-section broadcast arm with internal springs and an integrated XLR cable.

The RE20 delivers voice-tailored frequency response, minimal proximity effect, and sonic performance akin to a studio condenser mic, and the foam windscreen helps control noise from blasts of air such as plosives. The combination of the suspension shockmount and the broadcast arm yields low noise as you adjust the mic`s placement while providing the appearance of a video-ready setup.

Electro-Voice RE20 Broadcast Announcer Microphone with Variable-D (Black)

A broadcast industry standard, the RE20 Broadcast Announcer Microphone with Variable-D from Electro-Voice is a cardioid dynamic microphone that delivers reliable, low-noise performance with exceptional clarity and definition. This model is styled in a sleek black finish.

Tailored Response

Response tailored especially for vocals with high sound pressure handling capabilities.

Construction

Rugged, steel construction with low handling noise.

True Cardioid Pattern

The RE20 features a cardioid polar pattern with no coloration at 180-degrees off-axisthe frequency response is nearly independent of angular location of the sound source, creating virtually no off-axis coloration, yet providing the greatest possible rejection of unwanted sounds.

Internal Windscreen

An internal blast and wind filter eliminates pop and wind noise at the closest proximity. In recording sessions or on stage, singers can "close talk" the microphone, singing with their lips almost touching the grille screen with no worry of "P-pops" or excessive sibilance.

Bass Tilt-Down Switch

The bass tilt switch corrects spectrum balance for use in long-reach situations and eliminates low frequency noise and rumble.

Flat Frequency Respone

The RE20`s flat frequency response remains flat even at extremely close proximity.

EAN: 800549980944

Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte)

The black matte SSM-BC10 Microphone Suspension Shockmount from Auray is designed to keep your front-address microphone free from vibrations and noise that can often affect broadcast and voiceover applications. The heavy-duty bands isolate your microphone, eliminating the vibrations that can travel through your mic stand or broadcast arm.

The shockmount is equipped with a standard 5/8"-27 threaded socket and fits most mic stands and broadcast arms. Its locking knob and protective inner ring secure your mic in place while protecting its finish. The swiveling basket allows for precise microphone placement.

Eliminates Noise

The SSM-BC10 prevents unwanted vibrations that can radiate through a mic stand or broadcast arm from disrupting your broadcast or recording.

Swiveling Basket with Tension Knobs

The swiveling basket provides precise microphone positioning. Dual tension knobs maintain the angle of the microphone while still allowing smooth repositioning.

5/8"-27 Thread

The SSM-BC10 features a mic stand adapter with a standard 5/8"-27 thread that is compatible with most mic stands and broadcast arms.

Locking Knob with Inner Ring

The locking knob holds the microphone firmly in place. The inner ring applies uniform pressure to the outside of the microphone and prevents damage to the microphone finish

All-Metal Construction

The SSM-BC10 is a durable studio accessory that is built to last. The all-metal construction assures security and protection for the microphone.

Heavy-Duty Elastic Bands

The heavy-duty elastic bands suspend the microphone in the center of the basket, and prevent shocks and vibrations that can radiate through the mic stand or broadcast arm from reaching the microphone.

Black Matte Finish

Using the SSM-BC10 for on-air broadcast, the black matte finish will not reflect lights into the cameras.

For Front-Address Microphones

The SSM-BC10 fits front-address microphones such as the Electro-Voice RE20 and RE320 and the Heil Sound PR 40.

EAN: 847628585188

Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It`s ideal for broadcast, voiceover, and podcasts.

The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2X allows for precise microphone placement.

The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp`s slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.

Versatile

Ideal for studios as well as home use

Internal Springs

Internal springs provide smooth, noise-free positioning and clean and sleek profile

Sturdy

Supports microphones up to 5 lb / 2.27kg

Compatibility

The 5/8"-27 standard microphone thread is compatible with most shockmounts and microphone clips

Precision

Extends up to 40" / 101.6cm and rotates 360° allowing for precise microphone placement

XLR Cable

The integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transfer

Extra Height

A 14" / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors

Combo Mount

The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3" / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws

14" Riser

The included riser adds 14" / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitors

EAN: 847628578272

Auray WCF-UB440 Foam Windscreen for Large-Diaphragm Condenser Mics

The Auray WCF-UB440 Foam Windscreen for the Senal UB-440 is made from specialty acoustic foam designed to reduce broadband wind noise with minimal high-frequency loss. The density of the foam is optimized to help protect the microphone element from vocal plosives and wind pressure without dramatically muffling the sound.

This windscreen is effective indoors for protection against drafts caused by air conditioners and can be used in calm to light outdoor breeze conditions (0 to 7 mph). It also reduces vocal plosives in close microphone placement situations. Users can generally expect a 4 to 8 dB reduction in wind noise, with very slight dampening of high frequencies. For most applications, the very slight high-frequency dampen