Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Bellari SE560 Sonic Exciter and Preamp for Turntables
EAN: 675889005608
The Rolls Bellari SE560 is a sonic enhancer for turntables, though it also functions as a preamp thanks to its ability to provide 19.1 dB of gain. It sports RCA inputs for phonographs, as well as a single stereo 3.5mm input for phones, tablets, and compatible media players.
The sonic enhancement is provided by means of two knobs, both of which offer tonal shaping. The Bottom knob controls frequency enhancement over the lower frequencies, while the Definition knob brings out elements in the upper registers. You can switch this circuit in and out with the Active switch.
Use this unit as a sonic improvement in your turntable, looping the device in between your phono pre and preamp/power amp. Alternatively, try streaming audio from laptops, phones, and tablets through the SE560 to add a bit of luster back to lossy audio formats. Switch the circuit out, and the unit can function as a standalone preamp.
A 15 VDC power supply is provided with the SE560. This unit is manufactured in the United States of America.
EAN: 675889005608
The Rolls Bellari SE560 is a sonic enhancer for turntables, though it also functions as a preamp thanks to its ability to provide 19.1 dB of gain. It sports RCA inputs for phonographs, as well as a single stereo 3.5mm input for phones, tablets, and compatible media players.
The sonic enhancement is provided by means of two knobs, both of which offer tonal shaping. The Bottom knob controls frequency enhancement over the lower frequencies, while the Definition knob brings out elements in the upper registers. You can switch this circuit in and out with the Active switch.
Use this unit as a sonic improvement in your turntable, looping the device in between your phono pre and preamp/power amp. Alternatively, try streaming audio from laptops, phones, and tablets through the SE560 to add a bit of luster back to lossy audio formats. Switch the circuit out, and the unit can function as a standalone preamp.
A 15 VDC power supply is provided with the SE560. This unit is manufactured in the United States of America.
Bellari SE560 Specs
| Connections | 1 x 3.5 mm TRS stereo input 2 x RCA inputs (stereo pair) 2 x RCA outputs (stereo pair) |
| Controls | Bottom knob Definition knob Volume knob Active switch |
| Gain | 19.1 dB gain at 1 kHz |
| Impedance | Input: 1 kOhm Output: 100 Ohms (RCA) |
| Frequency Response | 3 Hz to 31 kHz |
| THD | 0.003% at 1 kHz |
| Signal to Noise Ratio | >100 dB unweighted |
| Indicator | 1 LED for power |
| Power | 15 VDC |
| Dimensions | 5.5 x 3.5 x 1.3" / 14.0 x 8.9 x 3.2 cm |
| Weight | 0.8 lb / 0.4 kg |
Packaging Info
| Package Weight | 1.2 lb |
| Box Dimensions (LxWxH) | 9.9 x 7.4 x 4.3" |
No posts found
