Create smooth blends with this which combines two Audio-Technica Consumer AT-LP140XP Direct-Drive Professional DJ Turntables to deliver a host of features that are suitable for use in nightclub DJ booths and mobile and home DJ applications. The AT-LP140XP features a rugged cast aluminum construction that houses a high-torque DC motor and a balanced S-shaped tonearm. The AT-XP3 DJ cartridge is included and premounted to an AT-HS6 universal 1/2" -mount headshell.
Additional professional features include a start/stop button, forward and reverse play, selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with ± 8%, ± 16%, and ± 24% adjustment ranges, a stroboscopic platter with speed indicator, a retractable plug-type stylus target light, and a removable hinged dust cover. The Audio-Technica AT-LP140XP also includes a counterweight, felt mat, and 45 rpm adapter.
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilization
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33 1/3/45/78 rpm speeds
- Professional anti-resonance, mass-damped, die-cast aluminum platter with felt mat
- AT-HS6 universal ½ " mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 rpm adapter, counterweight, felt mat, and removable hinged dust cover
Audio-Technica Consumer AT-LP140XP Specs
Cartridge Specifications
| Cartridge | AT-XP3 |
| Frequency Response | 20 Hz to 18 kHz |
| Channel Separation | >20 dB at 1 kHz |
| Tracking Force | Vertical Tracking Force: 2.0 to 4.0 g (3.0 g Standard) |
| Stylus | Stylus Construction: Bonded Round Sank Stylus Shape: 0.6 mm Conical Stylus Cantilever: Carbon Fiber-Reinforced ABS |
| Output | 5.5 mV at 1 kHz, 5 cm/sec |
| Channel Balance | 2.0 dB (1 kHz) |
| Mount | 0.5" / 12.7 mm |
| Replacement Stylus | ATN-XP3 |
Turntable
| Type | 3-Speed, Fully Manual |
| Motor | Direct Drive High-Torque DC Motor |
| Speeds | 33 1/3, 45, 78 rpm |
| Pitch Control Range | ±8%, ±16%, and ±24% |
| Turntable Platter | Die-Cast Aluminum |
| Torque | Starting Torque: >2.2 kgf cm |
| Wow and Flutter | <0.2% (WTD) @ 3 kHz (JIS) |
| Signal-to-Noise Ratio | >50 dB |
| Output Level | 5.5 mV nominal at 1 kHz, 5 cm/sec |
Tonearm
| Type | Balanced S-Shaped Tonearm with Detachable Headshell |
| Effective Arm Length | 9.1" / 230.5 mm |
| Overhang | 0.6" / 16.0 mm |
| Tracking Error Angle | <3° |
| Cartridge Weight | Applicable Cartridge Weight: 3.5 to 8.5 g |
| Anti-Skating Range | 0 to 4 g |
| Replacement Stylus | ATN-XP3 |
General Specifications
| Power | Power Supply Requirements: 115/230 VAC, 60/50 Hz Power Consumption: 11 W |
| Dimensions | 17.8 x 13.9 x 6.2" / 452.1 x 352.0 x 158.5 mm |
| Weight | 22.0 lb / 10.0 kg |
Packaging Info
| Package Weight | 26.3 lb |
| Box Dimensions (LxWxH) | 21.6 x 18 x 9.8" |
In the Box
- Audio-Technica Consumer AT-XP3 DJ Cartridge
- Audio-Technica Consumer AT-HS6 9g Headshell Aluminum Die Cast Body (Black)
- AC Power Cord
- Dual RCA to RCA Cable with Ground Wire
- 45 RPM Adapter
- Counterweight
- Felt Slip Mat
- Dust Cover
- Plug-Type Stylus Target Light
- 2-Year Manufacturer Warranty
No posts found
