With the addition of wireless capabilities, the white ATH-M20xBT Wireless Over-Ear Headphones from Audio-Technica are an introduction to the M-Series that can be more easily used inside and outside of the studio, compared to their wired counterpart. Whether you re a pro or simply a music fan, this Bluetooth wireless version of the ATH-M20x is made to deliver full-range, hi-fi audio reproduction using large, 40mm drivers with rare-earth magnets and copper-clad aluminum wire voice coils.
With a long battery life of up to 60 hours joining soft, noise-isolating earpads a padded headband, and integrated mobile-friendly technologies, you can comfortably enjoy your audio for days, whether it s music, streaming video, gaming, or phone calls.
Low-Latency Mode
The freedom of wireless headphones means that they are ideal companions for your smartphone or tablet, devices geared for more than just music. When streaming video with the ATH-M20xBT headphones, utilize low-latency mode to ensure that the audio you hear remains in sync with the action you view onscreen.
Pair to Two Devices with Multipoint
Simultaneous pairing with two different devices is possible thanks to support for multipoint technology. This feature makes it seamless to switch between devices as needed, without having to constantly repair. So if you re enjoying a game on your tablet, you can pause and quickly take an incoming phone call on your smartphone, then get back into the action when you re done.
Go Wireless or Wired
The included 3.9 audio cable lets you use these wireless over-ear headphones as traditional wired headphones. This is ideal for nonwireless devices and components as well as for the times when your batteries run low when using a wireless device with a headphone jack.
Additional Features
Audio-Technica Consumer ATH-M20xBT Specs
Headphone
| Earpiece Design | Over-Ear (Circumaural), Closed-Back |
| Earpiece Swivel | Not Specified by Manufacturer |
| Earpiece Connection / Wearing Style | Headband |
| Foldable | Not Specified by Manufacturer |
| Driver Type | Dynamic |
| Driver Size | 1.6" / 40 mm |
| Magnet Type | Neodymium |
| Voice Coil | Copper-Clad Aluminum Wire |
| Impedance | 36 Ohms |
| Active Noise Cancellation | No |
| Controls/Microphone Location | Controls: Left Earpiece Microphone: Left Earpiece |
| Full Remote OS Support | Not Specified by Manufacturer |
| Mobile App Compatible | No *As of January, 2023: Check with manufacturer for the most up-to-date compatibility |
Performance
| Frequency Response | 5 Hz to 32 kHz (Wireless) |
| Sensitivity | 100 dB/mW |
| Number of Voice Mics | 1 |
| Type | Electret Condenser |
| Pickup Pattern | Omnidirectional |
| Noise Canceling | Not Specified by Manufacturer |
| Frequency Response | 50 Hz to 20 kHz |
| Sensitivity | -42 dB at 1 kHz / 1000 mV/Pa |
| Wireless Modulation | Bluetooth: /4 DQPSK, 8DPSK, GFSK |
| Bluetooth | 5.0 |
| Supported Audio Codecs | AAC, SBC |
| Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
| Wireless Range | 33` / 10.1 m (Bluetooth) |
| Frequency | Bluetooth: 2.4 GHz (2.402 to 2.48 GHz) |
| Bluetooth Transmitter Power | 10 mW |
| NFC | No |
Wired Connectivity
| Audio Connector to Source | 1 x 1/8" / 3.5 mm TRS Right-Angled |
| Audio Connector to Earpiece | 1 x 1/8" / 3.5 mm |
| Cable Length | 1 x 3.9` / 1.2 m (1/8" / 3.5 mm) |
| Battery Chemistry | Lithium-Ion Polymer (LiPo) |
| Runtime | 60 Hours (BT) |
| Quick Charging Times | 10 Minutes for 3 Hours |
| Recharge Time | 4 Hours |
| Wireless Charging | None |
| Charging Port | USB-C |
Charging Case
| Charging Interface | Not Specified by Manufacturer |
| Operating Temperature | 37 to 72°F / 5 to 40°C |
| Color | White |
| Weight | Headphones: 7.6 oz / 216 g |
Packaging Info
| Package Weight | 1.55 lb |
| Box Dimensions (LxWxH) | 11.2 x 10.2 x 4.8" |
In the Box
- Audio-Technica Consumer ATH-M20xBT Wireless Over-Ear Headphones (White)
- 3.5mm Audio Cable (3.9`)
- USB Type-A to USB Type-C Charging Cable (1`)
- 2-Year Manufacturer Warranty
No posts found
