Audioengine DAC3 Portable Headphone Amplifier and DAC
EAN: 852225007339
The DAC3 by Audioengine is a 32-bit / 96 kHz digital to analog converter (DAC) and headphone amplifier designed to provide high-quality headphone listening for audiophiles on the go. The tiny, lightweight device attaches to your computer or mobile device via a USB-C port, which also supplies the unit with power. Digital audio from your source is converted and sent to the headphone amp, which outputs to a standard 3.5mm output jack the headphone amp is compatible with a wide range of headphones and earbuds with impedances ranging from 12 ohms to 10 kilohms. Lightning and USB-C cables are supplied, allowing you to use the DAC3 with both Android and iOS mobile devices.
Hi-Fi Your Headphones
No Batteries, No Charging, No Hassle
A Powerful DAC
EAN: 852225007339
The DAC3 by Audioengine is a 32-bit / 96 kHz digital to analog converter (DAC) and headphone amplifier designed to provide high-quality headphone listening for audiophiles on the go. The tiny, lightweight device attaches to your computer or mobile device via a USB-C port, which also supplies the unit with power. Digital audio from your source is converted and sent to the headphone amp, which outputs to a standard 3.5mm output jack the headphone amp is compatible with a wide range of headphones and earbuds with impedances ranging from 12 ohms to 10 kilohms. Lightning and USB-C cables are supplied, allowing you to use the DAC3 with both Android and iOS mobile devices.
Hi-Fi Your Headphones
- The DAC3 uses a high-performance headphone amplifier, which drives audiophile-grade headphones with ease and ensures plenty of headroom for your headset. Experience a wide dynamic range with the capacity to support the most demanding headphones.
- The high-performance amplifier easily drives headphones with impedances of 12 ohms or higher.
- The DAC3 isn t just for headphones the variable line-level output can be connected to any system with an analog audio input, such as Audioengine powered speakers or an A/V receiver.
No Batteries, No Charging, No Hassle
- With only 3 steps to connect and no batteries or charging required, your new DAC is ready to go right out of the box. The DAC3 simply draws its meager power requirement via a double-regulated USB-C connection.
- Simply plug into your phone, tablet, or computer using the included cables and let the DAC3 expose you to the missing resolution in your favorite music.
- The wired connection ensures full-range power for your headphones and support for your hi-res music files or apps.
A Powerful DAC
- The ES9281A PRO Ultra DAC delivers 32-bit precision, high dynamic range, and ultralow distortion.
- The DAC3 supports 44.1 to 96 kHz playback sample rates audio at 188.2 and 192 kHz is resampled to 96 kHz.
- Broad support is offered for standard hi-res audio formats including MQA, PCM, and DSD.
- Enjoy enhanced playback from your HD streaming apps (TIDAL, Amazon Music, Apple Music, Qobuz).
Audioengine DAC3 Specs
| Form Factor | Portable |
| Number of Headphone Channels | Single Channel |
| Recommended Headphone Impedance | 12 Ohms |
| Headphone Output Power | Not Specified by Manufacturer |
| Digital Chipset | DAC: 1 x ESS ES9281A |
| Analog Circuitry | Preamplifier Op-Amp: 1 x LME49726 |
| EQ | None |
| Display | None |
Connectivity
| Analog Audio I/O | 1 x 1/8" / 3.5 mm Line/Headphone Output |
| Digital Audio I/O | None |
| USB | 1 x USB-C (Digital Input, Power/Charging Input) |
| Wireless Connectivity | None |
Performance
| Frequency Response | 10 Hz to 25 kHz ±0.5 dB |
| Maximum Output Level | 1/8" / 3.5 mm Outputs: 2 Vrms |
| Impedance | Headphone Outputs: < 10 Kilohms |
| SNR | > 116 dB |
| Crosstalk | < -110 dB |
Digital Audio
| Sample Rates | USB-C Input: 384 kHz (PCM) 5.6 MHz (DSD) |
| Bit Depths | Up to 32-Bit |
Compatibility
| Mobile Device Compatibility | Android Smartphone Android Tablet iPad iPhone |
Power
| Power Requirements | USB Bus Power |
| DC Input Power | 5 VDC at 200mA |
| Current Consumption | 200 mA |
Physical
| Operating Temperature | 32 to 95°F / 0 to 35°C |
| Storage Temperature | -4 to 113°F / -20 to 45°C |
| Operating Humidity | 5 to 95% (Non-Condensing) |
| Dimensions | 1.9 x 0.6 x 0.4" / 48 x 15 x 10 mm |
Packaging Info
| Package Weight | 0.15 lb |
| Box Dimensions (LxWxH) | 4.2 x 4.1 x 1.2" |
In the Box
- Audioengine DAC3 Portable Headphone Amplifier and DAC
- USB-C to USB-C Cable
- USB-C to Lightning Cable
- 3-Year Manufacturer Warranty
No posts found
