Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Violectric HPA V202 Headphone Amplifier
Engineered to deliver high-fidelity sound quality in a compact, desktop form-factor, the HPA V202 Headphone Amplifier from Violectric is an attractively priced solution geared toward the beginner audiophile. The high damping factor makes the HPA V202 a smart choice for difficult to drive headphones, and the ultralow-noise operation pairs well with the 60V internal operating voltage provide incredible detail and optimal performance on both high- and low-impedance models.
Engineered to deliver high-fidelity sound quality in a compact, desktop form-factor, the HPA V202 Headphone Amplifier from Violectric is an attractively priced solution geared toward the beginner audiophile. The high damping factor makes the HPA V202 a smart choice for difficult to drive headphones, and the ultralow-noise operation pairs well with the 60V internal operating voltage provide incredible detail and optimal performance on both high- and low-impedance models.
The elegantly crafted amp offers both unbalanced 1/4 and unbalanced 4.4mm Pentaconn front-panel headphone jacks along with a large 38mm volume dial with an Alps RK 27 attenuator. An input switch lets you easily toggle between the balanced XLR and unbalanced RCA inputs on the rear panel. Also on the back are dip switches that allow you to set pre-gain levels from -18 to +18 dB to create a perfect match for your headphones.
At a Glance
- Natural and warm sounding headphone amp well suited to developing audiophile
- 60V internal operating voltage, ideal for high-impedance headphones
- High output power for headphones with low impedances and magnetostatics
- 2 stereo inputs, balanced via XLR and unbalanced via RCA
- Inputs switchable on the front panel
- +/- 18 dB pre-gain for a perfect match of the HPA V202 between source and headphones
- Volume control with Alps RK 27 attenuator
- Big 38mm aluminum knob
- 2700 mW Pmax into 50 Ohm
- 18.5 V RMS into 600 Ohm
- Delayed coupling of the headphones to the amp after power-on
- Two headphone jacks: one Pentaconn unbalanced and one 1/4 unbalanced
- Built-in power supply with toroidal transformer
- 22,000 uF filter capacity
Violectric HPA V202 Specs
| Form Factor | Tabletop |
| Number of Headphone Channels | Single Channel |
| Recommended Headphone Impedance | 16 to 600 Ohms |
| Headphone Output Power | 1500 mW into 16 Ohms 1700 mW into 32 Ohms 2700 mW into 50 Ohms 2200 mW into 100 Ohms 930 mW into 300 Ohms 570 mW into 600 Ohms |
| Digital Chipset | Not Specified by Manufacturer |
| EQ | None |
| Display | None |
Connectivity
| Analog Audio I/O | 2 x XLR 3-Pin Balanced Line Input (1 Stereo Pair) 2 x RCA Coaxial Unbalanced Line Input (1 Stereo Pair) 1 x 4.4 mm Unbalanced Headphone Output 1 x 1/4" Unbalanced Headphone Output |
| Digital Audio I/O | None |
| USB | None |
| Wireless Connectivity | None |
Performance
| Frequency Response | 5 Hz to 250 kHz |
| Gain/Trim Range | -18 dB to +18 dB (in 6 dB Steps, Pre-Gain) |
| Maximum Input Level | +21 dBu |
| Dynamic Range | 128 dB (A-Weighted) |
| Impedance | Inputs: 10 Kilohms Outputs: 0 to 25 Ohms |
| THD+N | < -100 dB / < 0.001% < -103 dB / < 0.0007% |
| Noise | < -100 dBu (A-Weighted) |
| Crosstalk | -100 dB (at 1 kHz) -95 dB (at 15 kHz) |
| Damping Factor | 200 at 50 Ohms |
Compatibility
| Mobile App Compatible | No *As of March, 2023: Check with manufacturer for the most up-to-date compatibility |
| Mobile Device Compatibility | None |
Power
| Power Requirements | AC Input |
| AC Input Power | 115 to 230 VAC, 50 / 60 Hz |
Physical
| Dimensions | 9.9 x 6.7 x 2.6" / 252 x 170 x 65 mm |
Packaging Info
| Package Weight | 6.065 lb |
| Box Dimensions (LxWxH) | 13.8 x 10 x 6" |
In the Box
- Violectric HPA V202 Headphone Amplifier
- 2-Year Manufacturer Warranty
No posts found
