Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Jensen Transformers Iso-Max SUB-1RR Single-Channel Subwoofer Isolator (RCA In/Out)
EAN: 676101041411
The Jensen Transformers Iso-Max SUB-1RR Single-Channel Subwoofer Isolator is a passive, unbalanced, and mono low-frequency isolator which prevents and eliminates hum and buzz caused by ground loops in subwoofers. It ensures that your music`s low-end is faithfully delivered without distortion, coloration, or artifact when used with audiophile systems, home theaters, car audio installations, and more.
EAN: 676101041411
The Jensen Transformers Iso-Max SUB-1RR Single-Channel Subwoofer Isolator is a passive, unbalanced, and mono low-frequency isolator which prevents and eliminates hum and buzz caused by ground loops in subwoofers. It ensures that your music`s low-end is faithfully delivered without distortion, coloration, or artifact when used with audiophile systems, home theaters, car audio installations, and more.
The SUB-1RR features a high-performance Jensen transformer which rejects noise by as much as 100 dB, and handles low frequencies down to 20 Hz with less than 0.01% distortion. It also extends your program` subsonic response down to 1 Hz, for maximum bass impact.
Easy to set up with no power required, the Iso-Max SUB-1RR comes with gold-plated RCA connectors that ensure optimal transfer of the audio signal. The unit is equipped with a rugged steel enclosure and fitted with screw-down flanges for mounting inside a rack, under shelves, or directly on the subwoofer.
Key Features
- Passive, unbalanced, mono, low-frequency isolator designed for use with subwoofers
- Eliminates hum and buzz caused by ground loops
- For use with audiophile systems, home theaters, Hi-Z recording sound cards, car audio systems, and more
- Specially designed Jensen audio transformer rejects noise by as much as 100 dB
- Handles low frequencies down to 20 Hz with less than 0.01% distortion and less than 1° & of phase shift
- Extended subsonic response down to 1 Hz-delivers powerful and articulated bass for maximum impact
- Low distortion-less than 1 dB of deviation, less than 0.05% harmonic distortion, and less than 2° & phase-shift at all frequencies
- Standard, gold-plated RCA connectors ensure optimal signal transfer and prevent corrosion over time
- Rugged steel enclosure fitted with screw-down flanges for easy installation in racks, under shelves, or for attaching to cabinetry
- Plug-and-play, easy to use, no power required
Jensen Transformers SUB-1RR Specs
| Type | Passive isolator |
| Channels | 1 (mono) |
| Connectors | Input: 1 x RCA, gold-plated, female, unbalanced Output: 1 x RCA, gold-plated, female, unbalanced |
| Frequency Response | Extended low-frequency response down to 1 Hz |
| Input Impedance | Zi, 100 Hz, -10 dBV, test circuit 1 Minimum: 39.0 kOhms Typical: 39.4 kOhms Maximum: 39.8 kOhms |
| Insertion Loss | 100 Hz, -10 dBV, test circuit 1 Minimum: -0.30 dB Typical: 0.00 dB Maximum: 0.30 dB |
| Magnitude Response | 2 Hz, -10 dBV, test circuit 1, ref 100 Hz Minimum: -0.25 dB Typical: -0.11 dB Maximum: -0.00 dB 20 kHz, -10 dBV, test circuit 1, ref 100 Hz Minimum: -0.80 dB Typical: -0.65 dB Maximum: -0.50 dB |
| Deviation from Linear Phase | 10 Hz to 2 kHz, -10 dBV, test circuit 1 Typical: +0.7 / -0° Maximum: ± 2.0° |
| Distortion (THD) | 100 Hz, -10 dBV, test circuit 1 Typical: < 0.001% 20 Hz, -10 dBV, test circuit 1 Typical: 0.01% Maximum: 0.05% |
| Maximum Input Level | At 20 Hz, 1% THD, test circuit 1 Minimum: +16 dBV Typical: +18 dBV |
| Common Mode Rejection Ratio | 60 Hz, test circuit 2 Typical: 105 dB 3 kHz, test circuit 2 Minimum: 50 dB Typical: 65 dB |
| Output Impedance | Zo, 100 Hz, test circuit 1 Typical: 5 kOhms |
| Source Impedance | Minimum: 0 Ohm Typical: 600 Ohms Maximum: 2 kOhms (Allowable output impedance of device driving the ISO-MAX input) |
| Load Impedance | Minimum: 20 kOhms Typical: 47 kOhms (Allowable input impedance of device loading the ISO-MAX output) |
| Load Capacitance | Minimum: 0 pF Typical: 50 pF Maximum: 1000 pF (Allowable cable and input capacitance loading the ISO-MAX output) |
| Optimal Cable Length | Input Typical: 9.8` / 3 m Maximum: 26.2` / 8 m Output Typical: 3.3` / 1 m Maximum: 9.8` / 3 m |
| Temperature Range | 32 to 158°F / 0 to 70°C (Operation or storage) |
| Voltage Difference | Maximum: 24 V RMS, 34 V peak (Input to output shield or either shield to chassis, 60 Hz) |
| Dimensions | 4.32 x 2.6 x 1.45" / 109.7 x 66.0 x 36.8 mm |
Packaging Info
| Package Weight | 0.75 lb |
| Box Dimensions (LxWxH) | 4.9 x 3.3 x 2.4" |
In the Box
- Jensen Transformers Iso-Max SUB-1RR Single-Channel Subwoofer Isolator (RCA In/Out)
- 2-Year Manufacturer Warranty
No posts found
