Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Ashly NXE1.52 Network Power Amplifier
EAN: 694970457461
The NXE1.52 Network Power Amplifier from Ashly Audio is the networkable version of the nX amplifier. It comes with Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability. All these are controlled using Ashly Audio s Protea software suite. This amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
2-channel high-output, lightweight amplifier with programmable output on each channel
Power saving, Energy Management System (Ashly EMS) automatic <1W sleep mode is defeatable
Front panel power switch and level controls can be disabled for security
Neutrik Combo XLR: 1/4 TRS jack plus Euroblock input connectors
Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED
Serial data port for use with Ashly remote control devices, or RS-232 converter (sold separately) for third party controllers (INA-1)
Uses Protea software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
Real-time clock with event scheduler
Instant standby mode, 30% reduction in power consumption with on/off triggered by contact closure, software control, or event scheduler
Programmable power-on delay
Preset recall via contact closure, software control, remote control, or event scheduler
Auxiliary preamplifier outputs and fault condition logic outputs
Cobranet or Dante network audio (sold separately) and AES3 digital audio input with pass-through
Ducking at mixer, peak hold indicator, in/out per filter, key engage, lock per filter, and global lock
EAN: 694970457461
The NXE1.52 Network Power Amplifier from Ashly Audio is the networkable version of the nX amplifier. It comes with Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability. All these are controlled using Ashly Audio s Protea software suite. This amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
2-channel high-output, lightweight amplifier with programmable output on each channel
Power saving, Energy Management System (Ashly EMS) automatic <1W sleep mode is defeatable
Front panel power switch and level controls can be disabled for security
Neutrik Combo XLR: 1/4 TRS jack plus Euroblock input connectors
Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED
Serial data port for use with Ashly remote control devices, or RS-232 converter (sold separately) for third party controllers (INA-1)
Uses Protea software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
Real-time clock with event scheduler
Instant standby mode, 30% reduction in power consumption with on/off triggered by contact closure, software control, or event scheduler
Programmable power-on delay
Preset recall via contact closure, software control, remote control, or event scheduler
Auxiliary preamplifier outputs and fault condition logic outputs
Cobranet or Dante network audio (sold separately) and AES3 digital audio input with pass-through
Ducking at mixer, peak hold indicator, in/out per filter, key engage, lock per filter, and global lock
Ashly nXE1.52 Specs
General Specifications
| Maximum Output Power | Max Output Power Per Channel, EIAJ Test Standard 2 ©: 1,500 W, 4 ©: 1,500 W , 8 ©: 1,250 W Low Z output, Bridge Mode, 20Hz to 20kHz, 1%THD, All Channels Driven 4 ©: 3,000 W 70 V, 100 V Output, All Channels Driven 70 V (per channel): 1,500 W 100 V (per channel): 1,250 W |
| Power Draw | Total Power Draw All Channels Driven Sleep Mode: <1 W Standby Mode: 40 W Idle (no signal): 55 W |
| Current Draw | Current Draw 240VAC Mains (divide in half for 240V) Sleep Mode: 0.1 A Standby Mode: 0.70 A Idle (no signal): 1.00 A Maximum Current Draw All Channels Driven, Divide by 2 for 240VAC Typical: 8.0 A |
| Dissipation | Thermal Dissipation BTU/hr, All Channels Driven Sleep Mode: <3.4 Standby Mode: 136 Idle (no signal): 187 Typical (1/8 max power): 850 |
| Power Requirements | Power Requirements (@ 50/60Hz) Nominal (Automatic Sensing SMPS)@ 50 Hz Nominal (Automatic Sensing SMPS): 240 VAC Operating Range: 70 to 135 VAC Minimum Power-Up: 85 VAC Power Requirements @ 60Hz Nominal (Automatic Sensing SMPS): 240 VAC Operating Range: 140 to 270 VAC 170 VAC |
| Power Connector | Power Cable Connector: 20 A powerCON |
| Input Source | Input Source Select Options (Protea DSP): Analog, Auto (Net, AES3, Analog) |
| Limiter | Brick Wall Limiter (Protea DSP) Threshold: -20 to +20 dBu Ratio: Infinite Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB |
| Compressor | Threshold: -20 to +20 dBu Ratio: 1.2:1 to infinite Attack: 0.2 to 50 ms Release: 5 to 1000 ms/dB Detector: Peak / average Attenuation Bus: 2 available Metering: In, out, attenuation, graphical |
| Control | Autoleveler Controls Target Level: -40 to +20 dBu Action: Gentle, normal, aggressive, user defined Maximum Gain: 0 to +22 dB Metering: Input, Gain, Attenuation Ratio: 1.2:1 to 10:1 Threshold Below Target: -30 to 0 dB Gain Increase/Decrease Rate: 5 to 1000 ms/dB Hold Time: 0 to 6 s |
| Noise | Ambient Noise Compensation: Output Only Max Gain: -20 to +20 dB Min/Base Gain: -40 to +20 dB Gain Change Rate: 0.2 to 20 s/dB Link Group: 16 available ANC Input Channel: 1 to 2 or 1 to 4 Noise Threshold: -40 to +20 dBu Program/Ambient Gain Ratio: 0.3:1 to 3:1 Metering: Input level, Attenuation, Average noise |
| Ducking | Ducking: High/Low Priority, Trigger, Filibuster, Ducked Program Trigger Threshold: -80 to +20 dBu Ducking Release: 5 to 1000 ms / dB Ducking Depth: 0 to -30 dB, -₧ Metering: Input |
| Gate | Threshold: -80 to +20 dBu Range: off, 100 to 0 dB Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB Metering: Key signal, Gate LED, graphical Advanced Gate Controls Key Frequency: 20 Hz to 20 kHz Key Bandwidth: 0.016 to 3.995 octave |
| Gain | Gain (with/without VCA): -50 to +12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to -₧ WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute |
| Band | 31-Band Filter Type: Constant Q or proportional Bandwidth: 0.499 to 0.25 oct Parametric 2,4,6, or 10 Band Frequency: 20 Hz to 20 kHz Level: -30 to +15 dB Q Value: 0.016 to 3.995 octave Hi/Low Shelf 6/12 dB/oct Frequency: 20 Hz to 20 kHz Level: -15 to +15 dB All Pass Frequency: 20 Hz to 20 kHz Variable Q HP/LP Frequency: 20 Hz to 20 kHz Q Value: 3.047 to 0.267 Notch/Bandpass Frequency: 20 Hz to 20 kHz Q Value: 92.436 to 0.267 Filters: 12 Filter Modes: Float, restricted, manual Filter Type: Notch, parametric Filter Frequency Range: 20 Hz to 20 kHz Notch Filter: -₧ Parametric Filter: +15 to -30 dB Filter Bandwidth: 0.016 to 3.995 octave Detector Sensitivity: 5 levels Float Time: 5 minutes to 24 hours Bessel & Butterworth Filters: 12/18/24/48 dB/oct Linkwitz-Riley Filter: 12/24/48 dB/oct Frequency: Off, 20 Hz to 20 kHz Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms |
| Audio Metering | Range: -60 to +20 dBu Increments: 1 dB Signal Level: Off, -50 to +20 dBu Sine Wave Frequency: 20 Hz to 12 kHz |
| Matrix Type | Matrix Mixer Gain (0.5dB increments): Off, -50 to +12 dB Mute: Per channel Auto-mixer Enabled: Per channel Global Auto-mixer Response: 0.01 to 2 sec Ducking LED: Per channel if enabled Metering: Level, auto-mixer level |
| Processor | Input A/D, Output D/A: 24-bit DSP Processors: 32-bit floating point Sample Rates: 48, 96 kHz Propagation Delay @ 48kHz: 1.42 ms Propagation Delay @ 96kHz: 0.71 ms |
Other Specifications
| Cooling | Continuously variable temperature controlled axial fan(s) |
| Environmental | Non Condensing: 32 to 113°F ( 0 to 45°C) |
| Dimensions | 19.0 x 3.5 x 16.8" (483.0 x 89.0 x 428.0 mm) |
| Weight | <28 lb (12.7 kg) |
Packaging Info
| Package Weight | 25 lb |
| Box Dimensions (LxWxH) | 19 x 16 x 4" |
In the Box
- Ashly NXE1.52 Network Power Amplifier
- 5-Year Manufacturer Warranty
No posts found
