Blustream NPA70DA Overview
Bring advanced audio integration in your commercial or residential AV installation with this Dante Networked Power Amplifier from Blustream. This versatile networked audio zone amplifier can provide dual 35W power for 2-channel applications or 70W in mono with support for 70/100V high-level constant voltage output and Dante integration.
The unit can be powered via PoE++ (Power over Ethernet) from a compatible network switch or locally if the network switch being employed does not support PoE++. It supports DSP, has a 31-band EQ, and can be controlled via front-panel buttons, IR, RS-232, or IP, and has a built-in web GUI for setup and control. The amplifier comes with a 24 VDC power supply as an alternate powering option and mounting kits for rack, wall, or surface mounting.
Features at a Glance
- Advanced network audio amplifier with Dante integration
- Supports 2 x 35W at 4 / 8 ohms or 1 x 70W at 4/8 ohms
- 70/100V constant output for multiple speakers with longer cable runs
- Supports power via PoE++ on Dante LAN connection or local power via included power supply
- Dual network option with independent Dante and LAN control ports, or combined to a single LAN
- 2-Channel Dante / AES67 audio input
- DSP with 31 band EQ with +3 dB / -10 dB and audio delay
- Local 12V input trigger for automated power control
- Control via front panel, IR, RS-232, and IP
- Auto-standby mode with signal sensing
- Built-in web GUI for setup and control
Blustream NPA70DA Specs
Key Specs
| Number of Channels | 2 |
| Amplifier Power Rating | 1x 70 W 2x 35 W |
| DSP | Yes |
| Analog Audio I/O | 1x Block 3-Pin Female 70/100 V Output |
| Digital I/O | 1x Block 4-Pin Output |
| Network I/O | 1x RJ45 AES67 / Dante 1x RJ45 Ethernet (PoE) |
| Rackmount Size | 1 RU (with Included Hardware) |
In the Box
- Blustream Dante Networked Power Amplifier
- 24 VDC, 3.5A Power Supply
- Remote Control
- IR Receiver
- Rack Mounting Kit
- Wall/Surface Mounting Kit
- 4 x Rubber Foot
- 2-Year Manufacturer Warranty
No posts found
