Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Crown Audio CDi 2|1200 2-Channel DriveCore Series Power Amplifier (1200W at 4 Ohms)
EAN: 691991006968
Audio professionals in search of a cost-effective professional audio amplifier will be impressed with the Crown Audio CDi 2|1200, a 2-Channel DriveCore Series power amplifier that utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|1200 offers streamlined functionality for most small- to medium-sized installations such as restaurants, retail stores, and more.
Network Control and Monitoring
Through HARMAN s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
DSP
Onboard Digital Signal Processor in each amplifier allows for custom configuration and includes these integrated features:
Direct Drive 70/100 Vrms Output
Each output channel is capable of providing either 70 or 100V for high-impedance applications.
Front-Panel Interface
Completely configure the amplifier using an intuitive front-panel interface.
GPIO / Aux Port
Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Pre-Loaded Speaker Tunings
For quicker and easier set up and installation.
EAN: 691991006968
Audio professionals in search of a cost-effective professional audio amplifier will be impressed with the Crown Audio CDi 2|1200, a 2-Channel DriveCore Series power amplifier that utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|1200 offers streamlined functionality for most small- to medium-sized installations such as restaurants, retail stores, and more.
The amplifier is capable of driving up to 70/100 Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|1200 features an Ethernet port for using HARMAN s HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
- DriveCore Technology: Patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliability
- Supports configuration and control using HiQnet Audio Architect
- Monitoring and control over TCP/IP
- Color LCD and front-panel user interface for amplifier configuration, control, and monitoring
- Programmable GPIO (general purpose input/output) control port
- Digital signal processing (input/output EQ filters, crossover, input/output delay, LevelMAX limiters)
- Support for importing of FIR filter coefficients
- 20 device presets-1 factory and 19 user
- 96 kHz/32-bit floating-point signal processing
- Universal power supply with PFC for reduced current draw and industry-leading efficiency
- Power saving modes
- Remote power off-Sleep mode activated via AUX port
- 70/100Vrms direct drive
- Each channel independently configurable for low-Z or high-Z operation
- Advanced protection circuits-amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/undervoltage, and high-frequency overload
- Three-year, no-fault transferable warranty-your investment is fully protected
- Complies with GreenEdge by HARMAN-environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation
- Support for BSS Audio Soundweb Contrio Ethernet wall controllers
- Included speaker tuning for various JBL speaker models
Network Control and Monitoring
Through HARMAN s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
DSP
Onboard Digital Signal Processor in each amplifier allows for custom configuration and includes these integrated features:
- Input Router
- Input Delay-up to 1000ms
- Input Parametric EQ-8 band
- Crossover
- Output Parametric EQ-8 band
- Output Delay-up to 100ms
- LevelMAX Limiter
Direct Drive 70/100 Vrms Output
Each output channel is capable of providing either 70 or 100V for high-impedance applications.
Front-Panel Interface
Completely configure the amplifier using an intuitive front-panel interface.
GPIO / Aux Port
Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Pre-Loaded Speaker Tunings
For quicker and easier set up and installation.
Crown Audio CDi 2|1200 Specs
Amplifier
| Number of Channels | 2 |
| Power Rating | 4 Ohms / 8 Ohms / 70 V / 100 V: 1200 W per Channel 2 Ohms: 850 W per Channel 16 Ohms: 600 W per Channel 4 Ohms: 1200 W Bridged 8 Ohms / 16 Ohms / 70 V / 100 V: 2400 W Bridged |
| Load Impedance / Voltage | Stereo: 2 / 4 / 8 / 16 Ohms per Channel 70 / 100 V per Channel Bridged: 4 / 8 / 16 Ohms 140 / 200 V |
Performance
| Protections | DC Fault, Low Impedance, Open Circuit, Overcurrent, Overvoltage, Ultrasonic, Undervoltage |
| Frequency Response | 20 Hz to 20 kHz ±0.25 dB (8 Ohms) |
| Damping Factor | > 1000 |
| Input Sensitivity | Line: 0.7 Vrms to 2.5 Vrms / -.8 dBu to 10.2 dBu (at 8 Ohms) 1 Vrms to 3.5 Vrms / 2.2 dBu to 13.2 dBu (at 70 V) 1.4 Vrms to 5 Vrms / 5.2 dBu to 16.2 dBu (at 100 V) |
| Input Impedance | 10 Kilohms (Balanced) 5 Kilohms (Unbalanced) |
| Max Gain | 34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V) |
| Max Input Level | +20 dBu |
| SNR | > 104 dB |
| THD | 0.35% (at Rated Power) |
| Intermodulation Distortion | 0.35% |
| Crosstalk | > 80 dB (Below Rated Power) |
| CMRR | > 70 dB |
Signal Processing
| DSP | 32-Bit Floating Point DSP at 96 kHz |
| Audio Delay | Adjustable Up to 1000 ms per Channel |
| Crossover | High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel High-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel Low-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley |
| EQ | 8-Band Parametric EQ per Channel |
| Limiting | Yes |
Connectivity
| Analog Audio I/O | 1 x Block 6-Pin Balanced Line Input 1 x Barrier Strip 4-Pin Speaker Output |
| Digital I/O | 1 x RJ45 Ethernet Input/Output (Control) |
| USB | None |
| Mobile App Compatible | No *As of December, 2022: Check with manufacturer for the most up-to-date compatibility |
Power
| AC Input Power | Universal: 100 to 240 VAC, 50 / 60 Hz |
| AC Power Connector | 1 x IEC 15 A / NEMA 5-15 |
| Current Consumption | 120 VAC: 3.5 to 7.2 A (1/8 Power) 5.4 to 9.1 A (1/3 Power) 230 VAC: 2 to 2.1 A (1/8 Power) 3.9 to 4.9 A (1/3 Power) |
| Power Consumption | 120 VAC: 117 to 149 W (1/8 Power) 196 to 313 W (1/3 Power) 230 VAC: 128 to 140 W (1/8 Power) 196 to 269 W (1/3 Power) |
Physical
| Display & Indicators | Front Panel: 1 x Multi-Color Graphic LCD |
| Rackmount Size | 2 RU |
| Cooling | Fan (Variable Speed) |
| Thermal Dissipation | 1068 BTU/hr (Maximum) |
| Dimensions | 19.0 x 3.5 x 16.0" / 48.3 x 8.9 x 40.6 cm |
| Weight | 17.2 lb / 7.8 kg |
In the Box
- Crown Audio CDi 2|1200 2-Channel DriveCore Series Power Amplifier (1200W at 4 Ohms)
- Terminal Block
- Power Cord
- 3-Year Manufacturer Warranty
No posts found
