Dynacord PRM2P600 Overview
System installers and integrators looking for a flexible 2-channel amplifier will be pleased with the Dynacord V600:2, a lightweight 1 RU (1/2 rack) amplifier well suited for background music and announcements in small to midsized commercial installations. With its low energy consumption and flexible power-load allocation, the V600:2 provides easy and trouble-free performance with a reduced cost of ownership.
Notable features include powerTANK, which provides a reservoir of power while the Variable Load Drive (VLD), ensures the powerTANK provides consistent power to either channel with any impedance. The built-in DSP handles input routing and provides HPF, LPF, and peak limiting. The amplifier is equipped with a PFC power supply and protection to ensure reliable and safe operation for years to come. The included rackmount hardware allows you to mount one or two units in a single 1 RU rack. Euroblock connectors and an IEC power cord are also included.
At a Glance
- 2-channel amplifier, with a total powerTANK capacity of 600W
- Variable Load Drive (VLD), providing the same power into 4/8 ohms or 70/100V
- ecoRAIL and APD deliver significant reduction in power consumption
- dualCOOL convection cooling with additional intelligent fan in case of extreme thermal conditions
- Comprehensive protection package for reliable operation
powerTANK
powerTANK is a reservoir of available amplification power that is deployed flexibly across the 2 channels of the amplifier. There is no need to set up the powerTANK as it adapts to the requirements of each zone or output without extra manual configuration of each individual channel.
Variable Load Drive
Variable Load Drive (VLD) ensures that the powerTANK capacity is utilized efficiently, providing consistent power to any channel with any impedance.
dualCOOL
The dualCOOL thermal design means that the amplifier typically operates as a convection cooled amplifier, but in extreme thermal conditions the amplifier is also equipped with an intelligent multi-speed fan to ensure maximum performance and reliability in any application.
ecoRAIL
ecoRAIL s power consumption is similar to a regular standby level, yet ecoRAIL still produces audio output suitable for background music levels, and the Auto Power Down (APD) mode can be engaged to further reduce power consumption to less than 1W when there is no signal present for extended periods.
Line Input
The single-cable installation feature is compatible with AES72-1E (RJ45 connectors) wired devices. This solution provides easy installation for both channels without needing to wire all the connections individually.
PFC Power Supply
Equipped with a PFC power supply and protection features usually reserved for the professional power amplifiers, means that the amplifier resists complete shutdown situations and will always perform at its best under all conditions.
EAN: 800549373098
Dynacord PRM2P600 Specs
Key Specs
| Number of Channels | 2 |
| Amplifier Power Rating | 4 Ohms / 8 Ohms / 70 V / 100 V: 2x 300 W per Channel 4 Ohms / 70 V: 1x 500 W One Channel Driven (1 kHz) 8 Ohms / 100 V: 600 W One Channel Driven (1 kHz) |
| Load Impedance / Voltage | 4 / 8 Ohms per Channel 70 V (16.7 Ohms) 100 V (33.3 Ohms) |
| DSP | Yes |
| Analog Audio I/O | 1x Block 6-Pin Balanced Line Input 1x Block 5-Pin Control/Remote Input 1x Block 4-Pin Speaker Output |
| Digital I/O | 1x RJ45 Amplink Input (I/O, Network) |
| Network I/O | No |
| Rackmount Size | 1 RU (1/2-Rack) |
In the Box
- Dynacord V600:2 Two-Channel 600W Power Amplifier for Commercial Installations (1 RU, 1/2-Rack)
- IEC Power Cord
- 5-Pin Euroblock Remote Connector
- 6-Pin Euroblock Audio Input Connector
- 4-Pin Euroblock Speaker Output Connector
- 4 x Rubber Feet
- 2 x Short Rack Ear
- Long Rack Ear
- Connection Plate
- 3-Year Manufacturer Warranty
No posts found
