Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
LD Systems CURV 500 I AMP 4-Channel Installation Amplifier
The LD Systems CURV 500 I AMP is a 4-channel amplifier designed specifically for CURV 500 installations. Each of its four channels provides up to 240W RMS of Class-D amplification and can drive up to six CURV 500 satellites or one CURV 500 iSUB subwoofer.
The low-profile CURV 500 I AMP weighs only 15 pounds and occupies just 1 RU of rack space. The front panel features a high-contrast OLED screen and a single push encoder for easy access to important functions such as delay and 10-band EQ. The CURV 500 I AMP s rear panel sports balanced XLR and terminal block inputs and speakON-compatible and terminal block outputs for straightforward integration with mixers and speakers.
Thanks to the high-efficiency switch-mode power supply and the temperature-controlled low-noise fan, the CURV 500 I AMP offers reliable operation no matter where you use it.
The LD Systems CURV 500 I AMP is a 4-channel amplifier designed specifically for CURV 500 installations. Each of its four channels provides up to 240W RMS of Class-D amplification and can drive up to six CURV 500 satellites or one CURV 500 iSUB subwoofer.
The low-profile CURV 500 I AMP weighs only 15 pounds and occupies just 1 RU of rack space. The front panel features a high-contrast OLED screen and a single push encoder for easy access to important functions such as delay and 10-band EQ. The CURV 500 I AMP s rear panel sports balanced XLR and terminal block inputs and speakON-compatible and terminal block outputs for straightforward integration with mixers and speakers.
Thanks to the high-efficiency switch-mode power supply and the temperature-controlled low-noise fan, the CURV 500 I AMP offers reliable operation no matter where you use it.
- Four channels with DSP control
- Purpose-designed for CURV 500 installations
- Drives up to six CURV 500 satellites or one CURV 500 iSUB subwoofer per channel
- Delivers 240W RMS at 4 ohms with less than 0.01% THD
- 10 Hz to 22 kHz frequency response
- Low-profile 1 RU rackmount chassis
- High-contrast OLED display
- Simple operation via single push encoder
- Presets for various satellite and subwoofer configurations
- Delay and 10-band parametric EQ per channel
- Soft-start circuit, DC, overcurrent, thermal, and short-circuit protection
- Temperature-controlled low-noise fan
- High-efficiency, switch-mode power supply
- Balanced XLR and terminal block inputs
- Terminal block and speakON-compatible outputs
- Lightweight at only 15 pounds
LD Systems CURV 500 IAMP Specs
| Number of Channels | 4 |
| Power Rating | 4 Ohms: 4 x 240 W RMS per Channel (1 kHz) 8 Ohms: 4 x 120 W RMS per Channel (1 kHz) 16 Ohms: 4 x 60 W RMS per Channel (1 kHz) 70 V: 2 x 480 W RMS Bridged (1 kHz) |
| Amplifier Class | Class-D |
Performance
| Protections | DC Fault, Output Limiter, Overcurrent, Short Circuit, Thermal |
| Frequency Response | 10 Hz to 22 kHz |
| THD | 4 Ohms: < 0.01% (1 kHz, at Rated Power) |
Signal Processing
| Sample Rate | 48 kHz |
| AD/DA Conversion | 24-Bit |
| DSP | Yes |
| Audio Delay | Adjustable Up to 166 ms per Channel |
| Crossover | Yes |
| EQ | 10-Band Parametric EQ per Channel |
| Limiting | Yes |
Connectivity
| Analog Audio I/O | 4 x XLR 3-Pin Female Balanced Line Input 4 x Block 3-Pin Male Balanced Line Input 4 x speakON NL4 Male Speaker Output 4 x Block 2-Pin Male Speaker Output |
| Digital I/O | None |
| USB | 1 x USB-B (Remote, Service) |
Power
| AC Input Power | Universal: 110 to 120 VAC, 60 Hz (T 10 A L 250 V) 220 to 240 VAC, 50 Hz (T 5 A L 250 V) |
| AC Power Connector | 1 x IEC / NEMA 5-15 |
| Power Consumption | 1100 W (Full Power) |
Physical
| Display & Indicators | Front Panel: 1 x OLED |
| Rackmount Size | 1 RU (with Included Hardware) |
| Cooling | 1 x Fan |
| Operating Temperature | 32 to 67°F / 0 to 35°C |
| Dimensions | 19.0 x 1.7 x 16.5" / 48.2 x 4.4 x 42.0 cm |
| Weight | 15 lb / 6.8 kg |
In the Box
- LD Systems CURV 500 I AMP 4-Channel Installation Amplifier
- IEC Power Cable
- 2-Year Manufacturer Warranty
No posts found
