Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
ATI Audio Inc ADA416-PHX Low-Noise Analog Distribution Amplifier with Phoenix Connectors
The ATI ADA416-PHX is an amplifier capable of routing audio to four distribution amplifier channels, all via balanced Phoenix inputs and outputs. The unit provides a master gain adjustment control for each channel, while individual trimmers are on hand for each output to accommodate gears of various sensitivities over its 20 dB range. Use it to distribute audio in offices, nightclubs, and more.
You`re sure to get a low-noise, strong-signal operation out of the unit, as it`s RF protected to eliminate noise from radio interference. It`s also designed to give you pure signal even when you`re using lossy cable splitters over long cable runs.
Its automatically ground-sensing active outputs can connect to either balanced or unbalanced loads. In total, the unit provides 4 Phoenix inputs and 16 Phoenix outputs, divided into four independent channels, with separate input and clipping LEDs for each 1x4 group. That way, you know if you`re ever likely to distort audio passing through.
The ATI ADA416-PHX is an amplifier capable of routing audio to four distribution amplifier channels, all via balanced Phoenix inputs and outputs. The unit provides a master gain adjustment control for each channel, while individual trimmers are on hand for each output to accommodate gears of various sensitivities over its 20 dB range. Use it to distribute audio in offices, nightclubs, and more.
You`re sure to get a low-noise, strong-signal operation out of the unit, as it`s RF protected to eliminate noise from radio interference. It`s also designed to give you pure signal even when you`re using lossy cable splitters over long cable runs.
Its automatically ground-sensing active outputs can connect to either balanced or unbalanced loads. In total, the unit provides 4 Phoenix inputs and 16 Phoenix outputs, divided into four independent channels, with separate input and clipping LEDs for each 1x4 group. That way, you know if you`re ever likely to distort audio passing through.
ATI Audio Inc ADA 416-PHX Specs
Inputs | 4 x Active-Balanced Phoenix Block Connections |
Filtering | RFI Filtering |
Input Level | Adjustable between -10 dBu to +4 dBu, +26 dBu Max |
Input Impedance | > 10 Kilohms, Balanced |
CCMR | 60 dB at 60 Hz |
Gain | 20 dB Max |
Nominal Level | + 4 dBu, Input and Output |
Peak Level | Input: +26 dBu Output: +26 dBu |
Outputs | 16 x Phoenix Block Connections |
Output Level | +4 dBu, +26 dBu Max |
Output Impedance | < 40 Ohms |
Output Gain | + 8 to - 10 dB for each Output |
Output Protection | Short Circuit Protection on Each Output |
Frequency Response | 20 Hz to 20 kHz (±0.1 dB) |
THD | At 4 dB: 0.01%, 20 Hz to 20 kHz Max: 0.1%, 20 Hz to 20 kHz |
IMD | 0.05% |
Signal to Noise Ratio | > 90 dB, 20 Hz to 22 kHz |
Channel | Interchannel Level Difference: > 0.5 dB, 20 Hz to 20 kHz Interchannel Phase Difference: < 0.5°, 20 Hz to 20 kHz Interchannel Crosstalk: > 90 dB, 20 Hz to 20 kHz |
Slew Rate | 13 V per Microseconds |
Power | Auto-Sensing 110 to 240 VAC (±10%) 47 to 63 Hz, 20 VA |
Dimensions | 19 x 1.8 x 7.5" / 48.3 x 4.4 x 19 cm |
Weight | 5 lb / 2.3 kg |
Packaging Info
Package Weight | 10.2 lb |
Box Dimensions (LxWxH) | 20.5 x 17.5 x 6" |
In the Box
- ATI Audio Inc ADA416-PHX Low-Noise Analog Distribution Amplifier with Phoenix Connectors
- 2-Year Warranty
No posts found